dani/CommandStation-EX
1
0
Fork 0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2025-02-19 23:46:02 +01:00
Code Releases Activity
996 Commits 70 Branches 101 Tags 29 MiB
3ca75d9615
Commit Graph

996 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Neil McKechnie
58fe81bf06 Update EthernetInterface.h 
Remove spurious character.
 2021-11-11 23:59:50 +00:00
Harald Barth
1807189183 make it possible to disable EEPROM code to save flash space 2021-11-08 02:07:21 +01:00
Harald Barth
0e78cf6e55 Committing a SHA 2021-11-07 23:20:28 +00:00
Harald Barth
6c75563779 handle negative pins 2021-11-08 00:19:23 +01:00
Harald Barth
89dcafb2d7 Committing a SHA 2021-11-07 16:04:52 +00:00
Harald Barth
37904b5fa6 make rc1 2021-11-07 17:03:28 +01:00
Harald Barth
fbca15d2a7 Merge branch 'master-ex-rail' 2021-11-07 17:01:16 +01:00
Harald Barth
177c8c0367 Merge branch 'EX-RAIL-sensormod' 2021-11-07 16:17:22 +01:00
Harald Barth
7ea3faf177 Merge branch 'EX-RAIL' 2021-11-07 16:14:38 +01:00
Harald Barth
d3381c6b2d Committing a SHA 2021-11-07 15:05:58 +00:00
Harald Barth
8853b23f88 uopdate version.h 2021-11-07 16:04:49 +01:00
Harald Barth
a16f6c8749 configure pins correct even when HAL not used 2021-11-06 22:12:32 +01:00
Harald Barth
e3d771a24d set default pullup in EXRAIL begin code 2021-11-06 21:57:06 +01:00
Harald Barth
055bc7bfe2 unknown locos should have speed forward 2021-10-31 22:20:59 +01:00
Harald Barth
79ce71c2f9 Committing a SHA 2021-10-31 21:18:17 +00:00
Harald Barth
e3cbaf5f24 unknown locos should have speed forward 2021-10-31 22:17:51 +01:00
Harald Barth
250c372f5c Committing a SHA 2021-10-29 20:30:40 +00:00
Harald Barth
a9c31eb1ae YFROBOT: One more motor board with L298P 2021-10-29 22:30:01 +02:00
Asbelos
b9fed47d24 Merge branch 'EX-RAIL' of https://github.com/DCC-EX/CommandStation-EX into EX-RAIL 2021-10-21 22:44:47 +01:00
Asbelos
151f7d7f86 Fixup EXRAIL Read Loco issues 2021-10-21 22:44:25 +01:00
Neil McKechnie
b7bcd13347 Fix Arduino pin pullup initial state. 
If an Arduino pin was used as an input (e.g. by EXRAIL) without previously configuring it, the default pullup wouldn't be set up.  Now, on first call to the _read() method the pullup will be enabled.
 2021-10-21 16:43:42 +01:00
Neil McKechnie
4f16a4ca06 Fix GPIO Expander initial output state. 
Previously, pullups were enabled on GPIO Expander digital pins by default, even if the pin was only ever used as an output.  This could lead to a spurious HIGH state being seen by external equipment before the output is initialised to LOW.  To avoid this, the pin pullup is now not enabled until a configure or read operation is issued for the pin.
 2021-10-15 18:44:51 +01:00
Neil McKechnie
9097a62f42 Add new <D ANIN vpin> and <D ANOUT vpin value> commands. 
Alias for existing <D SERVO ...> command added as <D ANOUT ...> (since not all analogue outputs are servos).  Also, <D ANIN vpin> added to display the value of an analogue input pin.
 2021-10-08 13:30:23 +01:00
Neil McKechnie
80472a76dc I2CManager - support slower I2C speeds. 
Previously the driver allowed speeds down to 32kHz but lower speeds were not implemented correctly.
 2021-10-08 13:28:43 +01:00
Neil McKechnie
6dde811279 Optimise HAL drivers for TOF sensor and Analogue Inputs 
Increased use of async I2C in HAL drivers to reduce overall loop time overhead.
 2021-10-05 12:48:45 +01:00
Neil McKechnie
7aed7de6cd Change default LCD address. 
LCD Backpack Address in example config.h changed to 0x27 (to match the most commonly available PCF8574 device).
 2021-10-03 12:24:14 +01:00
Asbelos
bfc2b75eb5 SERIAL2 Typo 2021-10-01 11:01:32 +01:00
Harald Barth
0bb6b577fa Wifi STA or AP mode 2021-10-01 11:32:09 +02:00
Harald Barth
cf0c818138 Cleanup ESP specific details 2021-10-01 09:09:30 +02:00
Harald Barth
426b27f0dd Reworked use of ringbuffer 2021-09-30 22:55:14 +02:00
Harald Barth
19b4893b5f counter should be int, not uint8_t 2021-09-28 21:08:41 +02:00
Harald Barth
1c7a5320d8 more send diag 2021-09-28 17:31:12 +02:00
Harald Barth
afd4626988 send diag 2021-09-28 17:20:44 +02:00
Harald Barth
a194b8965c Ack read outside interrupt 2021-09-27 20:01:46 +02:00
Harald Barth
696d12fc5e test A0 2021-09-26 11:57:15 +02:00
Harald Barth
35cba02ee7 outboundRing uses sendData 2021-09-26 10:59:07 +02:00
Harald Barth
fa1d1619b6 wifi sendData 2021-09-26 08:37:59 +02:00
Harald Barth
b048879eaa Wifi active 2021-09-25 23:18:10 +02:00
Neil McKechnie
9fc805831d HAL: Minor optimisations 
Remove virtual method hasCallback().
Optimise findDevice() method (used by read, write etc.).
Simplify Sensor handling with regard to IO Devices that support callbacks.
 2021-09-23 10:54:27 +01:00
Neil McKechnie
ffc5d91561 Update version.h 2021-09-23 08:59:43 +01:00
Neil McKechnie
e11fd18849 Update IO_DCCAccessory.cpp 
Ensure the full range of addresses including 0 are handled.
 2021-09-22 14:12:23 +01:00
Neil McKechnie
32eb8fe8c7 Update version.h (3.1.7draft) 
Added partial list of changes from 3.1.6 to 3.1.7draft.
 2021-09-22 14:00:05 +01:00
Neil McKechnie
e287af83ff DCC Turnouts: Store address/subaddress separately. Enable address 0. 
The range of accessory decoder addresses for the <a> command is 0-511 in line with the DCC packet contents.  The turnout command previously rejected address 0; this has been changed to the same range of addresses can be used by both commands, i.e. address 0-511 and subaddress 0-3.  The linear address mapping remains so that linear address 1 is addr/subaddr 1/0; i.e. the first decoder address is not accessible by linear address.
 2021-09-22 10:38:11 +01:00
Neil McKechnie
e59e07b971 Improved HAL diagnostics 
Looptime diagnostic enhanced, and duplicated diagnostic messages removed from DFPlayer class.
 2021-09-21 13:43:52 +01:00
Neil McKechnie
302b16547e HAL driver enhancements 
Performance enhancements in IODevice::loop() function.
Improved error handling, device is placed off line if not responding.
Improved error reporting, device shown as offline if not operational (faulty or not present).
 2021-09-21 11:02:23 +01:00
Harald Barth
34474cbf5c WifiESP skeleton files 2021-09-21 09:23:52 +02:00
Harald Barth
7397a4089b first waveform on esp 2021-09-21 00:31:05 +02:00
Asbelos
08835e25c6 Merge branch 'EX-RAIL' of https://github.com/DCC-EX/CommandStation-EX into EX-RAIL 2021-09-18 13:10:18 +01:00
Asbelos
bda3c05265 Auto power on tell JMR 2021-09-18 13:10:13 +01:00
Neil McKechnie
f947c5bae5
Merge pull request #190 from DCC-EX/EX-RAIL-neil-HALDRIVERS 
Additional and enhanced HAL drivers
 2021-09-17 22:48:51 +01:00