dani/CommandStation-EX
1
0
Fork 0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-11-23 16:16:13 +01:00
Code Releases Activity
1,365 Commits 90 Branches 95 Tags 21 MiB
8a96791937
Commit Graph

1365 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Harald Barth
1c7a5320d8 more send diag 2021-09-28 17:31:12 +02:00
Harald Barth
afd4626988 send diag 2021-09-28 17:20:44 +02:00
Harald Barth
a194b8965c Ack read outside interrupt 2021-09-27 20:01:46 +02:00
Harald Barth
696d12fc5e test A0 2021-09-26 11:57:15 +02:00
Harald Barth
35cba02ee7 outboundRing uses sendData 2021-09-26 10:59:07 +02:00
Harald Barth
fa1d1619b6 wifi sendData 2021-09-26 08:37:59 +02:00
Harald Barth
b048879eaa Wifi active 2021-09-25 23:18:10 +02:00
Neil McKechnie
9fc805831d HAL: Minor optimisations 
Remove virtual method hasCallback().
Optimise findDevice() method (used by read, write etc.).
Simplify Sensor handling with regard to IO Devices that support callbacks.
 2021-09-23 10:54:27 +01:00
Neil McKechnie
ffc5d91561 Update version.h 2021-09-23 08:59:43 +01:00
Neil McKechnie
e11fd18849 Update IO_DCCAccessory.cpp 
Ensure the full range of addresses including 0 are handled.
 2021-09-22 14:12:23 +01:00
Neil McKechnie
32eb8fe8c7 Update version.h (3.1.7draft) 
Added partial list of changes from 3.1.6 to 3.1.7draft.
 2021-09-22 14:00:05 +01:00
Neil McKechnie
e287af83ff DCC Turnouts: Store address/subaddress separately. Enable address 0. 
The range of accessory decoder addresses for the <a> command is 0-511 in line with the DCC packet contents.  The turnout command previously rejected address 0; this has been changed to the same range of addresses can be used by both commands, i.e. address 0-511 and subaddress 0-3.  The linear address mapping remains so that linear address 1 is addr/subaddr 1/0; i.e. the first decoder address is not accessible by linear address.
 2021-09-22 10:38:11 +01:00
Neil McKechnie
e59e07b971 Improved HAL diagnostics 
Looptime diagnostic enhanced, and duplicated diagnostic messages removed from DFPlayer class.
 2021-09-21 13:43:52 +01:00
Neil McKechnie
302b16547e HAL driver enhancements 
Performance enhancements in IODevice::loop() function.
Improved error handling, device is placed off line if not responding.
Improved error reporting, device shown as offline if not operational (faulty or not present).
 2021-09-21 11:02:23 +01:00
Harald Barth
34474cbf5c WifiESP skeleton files 2021-09-21 09:23:52 +02:00
Harald Barth
7397a4089b first waveform on esp 2021-09-21 00:31:05 +02:00
Asbelos
08835e25c6 Merge branch 'EX-RAIL' of https://github.com/DCC-EX/CommandStation-EX into EX-RAIL 2021-09-18 13:10:18 +01:00
Asbelos
bda3c05265 Auto power on tell JMR 2021-09-18 13:10:13 +01:00
Neil McKechnie
f947c5bae5
Merge pull request #190 from DCC-EX/EX-RAIL-neil-HALDRIVERS 
Additional and enhanced HAL drivers
 2021-09-17 22:48:51 +01:00
Neil McKechnie
afe2ecdc14 Update IODevice.cpp 
Remove potentially irritating diag messages
 2021-09-17 12:44:27 +01:00
Neil McKechnie
fa650673eb DFPlayer: allow volume to be set in play command. 2021-09-17 12:31:28 +01:00
Neil McKechnie
ad7cd5f401 Remove virtual _isBusy() function in favor of _read(). 
When writing to analogue outputs pins, the digital _read() function now returns the 'busy' status of the analogue pin.  Consequently, the _isBusy() function becomes superfluous and has been removed.  The static IODevice::isBusy() function now calls the object's _read() function instead.
Also, limit in DFPlayer of 3 pins has been removed.
 2021-09-17 11:36:08 +01:00
Asbelos
d077e3a2ff Auto power on and POWEROFF macro 2021-09-16 16:47:47 +01:00
Neil McKechnie
07cc45d861 Update IO_DFPlayer.h 
Fix volume control command.
 2021-09-16 12:39:51 +01:00
Neil McKechnie
f3658aaee7 Update IO_HCSR04.h 
Change transmitPin to trigPin and receivePin to echoPin to match the markings on the device module.
 2021-09-16 00:17:26 +01:00
Neil McKechnie
3dc0b1619c Update IO_DFPlayer.h 2021-09-15 21:37:38 +01:00
Neil McKechnie
592f87303e Update IO_AnalogueInputs.h 
Increase frequency of ADC conversions to 4ms, since 10ms driver cycle isn't enough time for a 7.8ms conversion to complete reliably.
 2021-09-15 10:44:43 +01:00
Neil McKechnie
02a715d54d New DFPlayer MP3 device, and tidy comments in other drivers. 2021-09-15 00:23:24 +01:00
Neil McKechnie
f7d34b92ee Update mySetup.cpp_example.txt 2021-09-14 17:14:29 +01:00
Neil McKechnie
d316b72069 VL53L0X Time-Of-Flight sensor driver 
HAL Driver for VL53L0X Time-Of-Flight sensor.  Basic implementation, which doesn't include most of the calibration etc. so is very lean on memory and CPU but not as accurate as it could be.
 2021-09-14 12:34:31 +01:00
Ash-4
fc9aa71d9f
Merge pull request #189 from DCC-EX/EX-RAIL-Ash 
Ex rail ash
 2021-09-11 13:35:11 -05:00
Ash-4
72528658be
Merge branch 'EX-RAIL' into EX-RAIL-Ash 2021-09-11 13:32:17 -05:00
Neil McKechnie
4121a5f4da
Merge pull request #188 from DCC-EX/EX-RAIL-neil-AnalogueInputs 
Ex rail neil analogue inputs
 2021-09-11 14:22:48 +01:00
Neil McKechnie
2ed578821f Add analogue inputs to HAL. 
Add ability to read analogue inputs on arduino and on external ADS1115 I2C modules.
 2021-09-11 13:35:11 +01:00
Asbelos
70b59d491c Ash's OVERLOAD check 
Makes prog track accesses wait if track in overload
 2021-09-09 10:23:27 +01:00
Asbelos
254d83b6fc Remove SERIAL warning 2021-09-09 10:12:27 +01:00
Ash-4
ebabbbe59e
pause program steps if OVERLOAD 
line added to pause program steps during OVERLOAD.  case BASELINE
if (DCCWaveform::progTrack.getPowerMode()==POWERMODE::OVERLOAD) return;
 -- also added a line in DCCWaveform.cpp
 2021-09-08 14:06:39 -05:00
Ash-4
f8311b8c56
line added sentResetsSincePacket 
in DCCWaveform::setPowerMode(POWERMODE mode)
 -- to pause while power is off due to PROG TRACK POWER OVERLOAD
and line added after case BASELINE in DCC.cpp
 2021-09-08 14:00:42 -05:00
Asbelos
f38bf512ab Include SERIAL 2021-09-08 16:29:58 +01:00
Asbelos
9b3c6fe896 LCN and SERIAL/1/2/3 2021-09-08 16:21:04 +01:00
Asbelos
81dc512c86 Turnout print state and tell withrottle 2021-09-06 12:30:25 +01:00
Asbelos
222eca6524 XFON/XFOFF macros 2021-09-06 12:27:21 +01:00
Ash-4
4dff8a2b50
Restore ackManagerByte before retry Verify 
Identify where initial value was not verified, but initial value returned with subsequent Read.
RCOUNT removed.  BIV and ITCBV added.
 2021-09-05 16:43:24 -05:00
Ash-4
8d471d9f3f
Restore ackManagerByte before retry Verify 2021-09-05 16:19:03 -05:00
Asbelos
9ba13a62c9 Negative sensor ids 2021-09-04 10:38:38 +01:00
Asbelos
99222bd37f Turnout recursion test 2021-09-03 22:39:13 +01:00
Asbelos
9d5781a87c Signal pin corrections 2021-09-03 21:33:53 +01:00
Ash-4
b4fb76b6c8
Display running total ackRetrySum 
RCOUNT added to Verify program to report if Read step occurs.
Report ackRetrySum on LCD when <D ACK RETRY nn> is sent
 2021-08-30 17:02:05 -05:00
Ash-4
4b87c879a9
RCOUNT step added to Verify byte program 2021-08-30 16:52:50 -05:00
Ash-4
08810dafd7
Update retry counter 
<D ACK RETRY nn>  will also display running total prior to its reset.
RCOUNT step included in Verify program will count when Verify fails
 2021-08-30 16:37:06 -05:00