Merge branch 'devel' into devel_chris

This reverts commit 23845f2df2, reversing
changes made to 76755993f1.

DCC.cpp

@@ -325,8 +325,8 @@ preamble -0- 1 0 A7 A6 A5 A4 A3 A2 -0- 0 ^A10 ^A9 ^A8 0 A1 A0 1 -0- ....
 
 Thus in byte packet form the format is 10AAAAAA, 0AAA0AA1, 000XXXXX
 
-Die Adresse für den ersten erweiterten Zubehördecoder ist wie bei den einfachen
-Zubehördecodern die Adresse 4 = 1000-0001 0111-0001 . Diese Adresse wird in
+Die Adresse f<EFBFBD>r den ersten erweiterten Zubeh<EFBFBD>rdecoder ist wie bei den einfachen
+Zubeh<EFBFBD>rdecodern die Adresse 4 = 1000-0001 0111-0001 . Diese Adresse wird in
 Anwenderdialogen als Adresse 1 dargestellt.
 
 This means that the first address shown to the user as "1" is mapped
@@ -500,6 +500,36 @@ const ackOp FLASH READ_CV_PROG[] = {
 
 const ackOp FLASH LOCO_ID_PROG[] = {
       BASELINE,
+      // first check cv20 for extended addressing
+      SETCV, (ackOp)20,     // CV 19 is extended
+      SETBYTE, (ackOp)0,
+      VB, WACK, ITSKIP,     // skip past extended section if cv20 is zero
+      // read cv20 and 19 and merge 
+      STARTMERGE,           // Setup to read cv 20
+      V0, WACK, MERGE,
+      V0, WACK, MERGE,
+      V0, WACK, MERGE,
+      V0, WACK, MERGE,
+      V0, WACK, MERGE,
+      V0, WACK, MERGE,
+      V0, WACK, MERGE,
+      V0, WACK, MERGE,
+      VB, WACK, NAKSKIP, // bad read of cv20, assume its 0 
+      STASHLOCOID,   // keep cv 20 until we have cv19 as well.
+      SETCV, (ackOp)19, 
+      STARTMERGE,           // Setup to read cv 19
+      V0, WACK, MERGE,
+      V0, WACK, MERGE,
+      V0, WACK, MERGE,
+      V0, WACK, MERGE,
+      V0, WACK, MERGE,
+      V0, WACK, MERGE,
+      V0, WACK, MERGE,
+      V0, WACK, MERGE,
+      VB, WACK, NAKFAIL,  // cant recover if cv 19 unreadable
+      COMBINE1920,  // Combile byte with stash and callback
+// end of advanced 20,19 check
+      SKIPTARGET,
       SETCV, (ackOp)19,     // CV 19 is consist setting
       SETBYTE, (ackOp)0,
       VB, WACK, ITSKIP,     // ignore consist if cv19 is zero (no consist)
@@ -566,6 +596,10 @@ const ackOp FLASH LOCO_ID_PROG[] = {
 
 const ackOp FLASH SHORT_LOCO_ID_PROG[] = {
       BASELINE,
+      // Clear consist CV 19,20
+      SETCV,(ackOp)20,
+      SETBYTE, (ackOp)0,
+      WB,WACK,     // ignore dedcoder without cv20 support
       SETCV,(ackOp)19,
       SETBYTE, (ackOp)0,
       WB,WACK,     // ignore dedcoder without cv19 support
@@ -581,9 +615,25 @@ const ackOp FLASH SHORT_LOCO_ID_PROG[] = {
       CALLFAIL
 };
 
+// for CONSIST_ID_PROG the 20,19 values are already calculated
+const ackOp FLASH CONSIST_ID_PROG[] = {
+      BASELINE,
+      SETCV,(ackOp)20,
+      SETBYTEH,    // high byte to CV 20
+      WB,WACK,     // ignore dedcoder without cv20 support
+      SETCV,(ackOp)19,
+      SETBYTEL,   // low byte of word
+      WB,WACK,ITC1,   // If ACK, we are done - callback(1) means Ok
+      VB,WACK,ITC1,   // Some decoders do not ack and need verify
+      CALLFAIL
+};
+
 const ackOp FLASH LONG_LOCO_ID_PROG[] = {
       BASELINE,
-      // Clear consist CV 19
+      // Clear consist CV 19,20
+      SETCV,(ackOp)20,
+      SETBYTE, (ackOp)0,
+      WB,WACK,     // ignore dedcoder without cv20 support
       SETCV,(ackOp)19,
       SETBYTE, (ackOp)0,
       WB,WACK,     // ignore decoder without cv19 support
@@ -652,6 +702,26 @@ void DCC::setLocoId(int id,ACK_CALLBACK callback) {
       DCCACK::Setup(id | 0xc000,LONG_LOCO_ID_PROG, callback);
 }
 
+void DCC::setConsistId(int id,bool reverse,ACK_CALLBACK callback) {
+  if (id<0 || id>10239) { //0x27FF according to standard
+    callback(-1);
+    return;
+  }
+  byte cv20;
+  byte cv19;
+
+  if (id<=HIGHEST_SHORT_ADDR) {
+    cv19=id;
+    cv20=0;
+  }
+  else {
+    cv20=id/100;
+    cv19=id%100;
+  }
+  if (reverse) cv19|=0x80;
+  DCCACK::Setup((cv20<<8)|cv19, CONSIST_ID_PROG, callback);
+}
+
 void DCC::forgetLoco(int cab) {  // removes any speed reminders for this loco
   setThrottle2(cab,1); // ESTOP this loco if still on track
   int reg=lookupSpeedTable(cab, false);

DCC.h

@@ -85,7 +85,7 @@ public:
 
   static void getLocoId(ACK_CALLBACK callback);
   static void setLocoId(int id,ACK_CALLBACK callback);
-
+  static void setConsistId(int id,bool reverse,ACK_CALLBACK callback);
   // Enhanced API functions
   static void forgetLoco(int cab); // removes any speed reminders for this loco
   static void forgetAllLocos();    // removes all speed reminders

DCCACK.cpp

@@ -314,6 +314,14 @@ void DCCACK::loop() {
           callback( LONG_ADDR_MARKER | ( ackManagerByte + ((ackManagerStash - 192) << 8)));
           return;
 
+     case COMBINE1920:
+          // ackManagerStash is  cv20, ackManagerByte is CV 19
+          // This will not be called if cv20==0
+          ackManagerByte &= 0x7F;  // ignore direction marker
+          ackManagerByte %=100;    // take last 2 decimal digits 
+          callback( ackManagerStash*100+ackManagerByte);
+          return;
+
      case ITSKIP:
           if (!ackReceived) break;
           // SKIP opcodes until SKIPTARGET found
@@ -322,6 +330,15 @@ void DCCACK::loop() {
             opcode=GETFLASH(ackManagerProg);
           }
           break;
+
+     case NAKSKIP:
+          if (ackReceived) break;
+          // SKIP opcodes until SKIPTARGET found
+          while (opcode!=SKIPTARGET) {
+            ackManagerProg++;
+            opcode=GETFLASH(ackManagerProg);
+          }
+          break;
      case SKIPTARGET:
           break;
      default:

DCCACK.h

@@ -56,6 +56,8 @@ enum ackOp : byte
   STASHLOCOID,      // keeps current byte value for later
   COMBINELOCOID,    // combines current value with stashed value and returns it
   ITSKIP,           // skip to SKIPTARGET if ack true
+  NAKSKIP,          // skip to SKIPTARGET if ack false
+  COMBINE1920,      // combine cvs 19 and 20 and callback
   SKIPTARGET = 0xFF // jump to target
 };
 

DCCEXParser.cpp

@@ -458,6 +458,9 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
             DCC::setLocoId(p[0],callback_Wloco);
         else if (params == 4)  // WRITE CV ON PROG <W CV VALUE [CALLBACKNUM] [CALLBACKSUB]>
             DCC::writeCVByte(p[0], p[1], callback_W4);
+        else if ((params==2 || params==3 ) && p[0]=="CONSIST"_hk ) {
+            DCC::setConsistId(p[1],p[2]=="REVERSE"_hk,callback_Wconsist);
+        }    
         else if (params == 2)  // WRITE CV ON PROG <W CV VALUE>
             DCC::writeCVByte(p[0], p[1], callback_W);
 	else
@@ -1348,3 +1351,11 @@ void DCCEXParser::callback_Wloco(int16_t result)
     StringFormatter::send(getAsyncReplyStream(), F("<w %d>\n"), result);
     commitAsyncReplyStream();
 }
+
+void DCCEXParser::callback_Wconsist(int16_t result)
+{
+    if (result==1) result=stashP[1]; // pick up original requested id from command
+    StringFormatter::send(getAsyncReplyStream(), F("<w CONSIST %d%S>\n"),
+     result, stashP[2]=="REVERSE"_hk ? F(" REVERSE") : F(""));
+    commitAsyncReplyStream();
+}

DCCEXParser.h

@@ -71,6 +71,7 @@ struct DCCEXParser
     static void callback_R(int16_t result);
     static void callback_Rloco(int16_t result);
     static void callback_Wloco(int16_t result);
+    static void callback_Wconsist(int16_t result);
     static void callback_Vbit(int16_t result);
     static void callback_Vbyte(int16_t result);
     static FILTER_CALLBACK  filterCallback;

DCCTimer.h

@@ -65,7 +65,11 @@ class DCCTimer {
   static void startRailcomTimer(byte brakePin);
   static void ackRailcomTimer();
   static void DCCEXanalogWriteFrequency(uint8_t pin, uint32_t frequency);
-  static void DCCEXanalogWrite(uint8_t pin, int value);
+  static void DCCEXanalogWrite(uint8_t pin, int value, bool invert);
+  static void DCCEXledcDetachPin(uint8_t pin);
+  static void DCCEXanalogCopyChannel(int8_t frompin, int8_t topin);
+  static void DCCEXInrushControlOn(uint8_t pin, int duty, bool invert);
+  static void DCCEXledcAttachPin(uint8_t pin, int8_t channel, bool inverted);
 
 // Update low ram level.  Allow for extra bytes to be specified
 // by estimation or inspection, that may be used by other 

DCCTimerESP.cpp

@@ -78,6 +78,7 @@ int DCCTimer::freeMemory() {
 ////////////////////////////////////////////////////////////////////////
 
 #ifdef ARDUINO_ARCH_ESP32
+#include "DIAG.h"
 #include <driver/adc.h>
 #include <soc/sens_reg.h>
 #include <soc/sens_struct.h>
@@ -154,8 +155,10 @@ void DCCTimer::reset() {
 void DCCTimer::DCCEXanalogWriteFrequency(uint8_t pin, uint32_t f) {
   if (f >= 16)
     DCCTimer::DCCEXanalogWriteFrequencyInternal(pin, f);
-  else if (f == 7)
+/*
+  else if (f == 7) // not used on ESP32
     DCCTimer::DCCEXanalogWriteFrequencyInternal(pin, 62500);
+*/
   else if (f >= 4)
     DCCTimer::DCCEXanalogWriteFrequencyInternal(pin, 32000);
   else if (f >= 3)
@@ -188,23 +191,104 @@ void DCCTimer::DCCEXanalogWriteFrequencyInternal(uint8_t pin, uint32_t frequency
   }
 }
 
-void DCCTimer::DCCEXanalogWrite(uint8_t pin, int value) {
+void DCCTimer::DCCEXledcDetachPin(uint8_t pin) {
+  DIAG(F("Clear pin %d channel"), pin);
+  pin_to_channel[pin] = 0;
+  pinMatrixOutDetach(pin, false, false);
+}
+
+static byte LEDCToMux[] = {
+  LEDC_HS_SIG_OUT0_IDX,
+  LEDC_HS_SIG_OUT1_IDX,
+  LEDC_HS_SIG_OUT2_IDX,
+  LEDC_HS_SIG_OUT3_IDX,
+  LEDC_HS_SIG_OUT4_IDX,
+  LEDC_HS_SIG_OUT5_IDX,
+  LEDC_HS_SIG_OUT6_IDX,
+  LEDC_HS_SIG_OUT7_IDX,
+  LEDC_LS_SIG_OUT0_IDX,
+  LEDC_LS_SIG_OUT1_IDX,
+  LEDC_LS_SIG_OUT2_IDX,
+  LEDC_LS_SIG_OUT3_IDX,
+  LEDC_LS_SIG_OUT4_IDX,
+  LEDC_LS_SIG_OUT5_IDX,
+  LEDC_LS_SIG_OUT6_IDX,
+  LEDC_LS_SIG_OUT7_IDX,
+};
+
+void DCCTimer::DCCEXledcAttachPin(uint8_t pin, int8_t channel, bool inverted) {
+  DIAG(F("Attaching pin %d to channel %d %c"), pin, channel, inverted ? 'I' : ' ');
+  ledcAttachPin(pin, channel);
+  if (inverted) // we attach again but with inversion
+    gpio_matrix_out(pin, LEDCToMux[channel], inverted, 0);
+}
+
+void DCCTimer::DCCEXanalogCopyChannel(int8_t frompin, int8_t topin) {
+  // arguments are signed depending on inversion of pins
+  DIAG(F("Pin %d copied to %d"), frompin, topin);
+  bool inverted = false;
+  if (frompin<0)
+    frompin = -frompin;
+  if (topin<0) {
+    inverted = true;
+    topin = -topin;
+  }
+  int channel = pin_to_channel[frompin]; // after abs(frompin)
+  pin_to_channel[topin] = channel;
+  DCCTimer::DCCEXledcAttachPin(topin, channel, inverted);
+}
+
+void DCCTimer::DCCEXanalogWrite(uint8_t pin, int value, bool invert) {
+  // This allocates channels 15, 13, 11, ....
+  // so each channel gets its own timer.
   if (pin < SOC_GPIO_PIN_COUNT) {
     if (pin_to_channel[pin] == 0) {
+      int search_channel;
+      int n;
       if (!cnt_channel) {
           log_e("No more PWM channels available! All %u already used", LEDC_CHANNELS);
           return;
       }
-      pin_to_channel[pin] = --cnt_channel;
-      ledcSetup(cnt_channel, 1000, 8);
-      ledcAttachPin(pin, cnt_channel);
+      // search for free channels top down
+      for (search_channel=LEDC_CHANNELS-1; search_channel >=cnt_channel; search_channel -= 2) {
+	bool chanused = false;
+	for (n=0; n < SOC_GPIO_PIN_COUNT; n++) {
+	  if (pin_to_channel[n] == search_channel) { // current search_channel used
+	    chanused = true;
+	    break;
+	  }
+	}
+	if (chanused)
+	  continue;
+	if (n == SOC_GPIO_PIN_COUNT) // current search_channel unused
+	  break;
+      }
+      if (search_channel >= cnt_channel) {
+	pin_to_channel[pin] = search_channel;
+	DIAG(F("Pin %d assigned to search channel %d"), pin, search_channel);
+      } else {
+	pin_to_channel[pin] = --cnt_channel; // This sets 15, 13, ...
+	DIAG(F("Pin %d assigned to new channel %d"), pin, cnt_channel);
+	--cnt_channel;                       // Now we are at 14, 12, ...
+      }
+      ledcSetup(pin_to_channel[pin], 1000, 8);
+      DCCEXledcAttachPin(pin, pin_to_channel[pin], invert);
     } else {
-      ledcAttachPin(pin, pin_to_channel[pin]);
+      // This else is only here so we can enable diag
+      // Pin should be already attached to channel
+      // DIAG(F("Pin %d assigned to old channel %d"), pin, pin_to_channel[pin]);
     }
     ledcWrite(pin_to_channel[pin], value);
   }
 }
 
+void DCCTimer::DCCEXInrushControlOn(uint8_t pin, int duty, bool inverted) {
+  // this uses hardcoded channel 0
+  ledcSetup(0, 62500, 8);
+  DCCEXledcAttachPin(pin, 0, inverted);
+  ledcWrite(0, duty);
+}
+
 int ADCee::init(uint8_t pin) {
   pinMode(pin, ANALOG);
   adc1_config_width(ADC_WIDTH_BIT_12);

DCCTimerSTM32.cpp

@@ -333,7 +333,9 @@ void DCCTimer::DCCEXanalogWriteFrequencyInternal(uint8_t pin, uint32_t frequency
   return;
 }
 
-void DCCTimer::DCCEXanalogWrite(uint8_t pin, int value) {
+void DCCTimer::DCCEXanalogWrite(uint8_t pin, int value, bool invert) {
+    if (invert)
+      value = 255-value;
     // Calculate percentage duty cycle from value given
     uint32_t duty_cycle = (value * 100 / 256) + 1;
     if (pin_timer[pin] != NULL) {

EXRAIL2.cpp

@@ -54,6 +54,7 @@
 #include "TrackManager.h"
 #include "Turntables.h"
 #include "IODevice.h"
+#include "EXRAILSensor.h"
 
 
 // One instance of RMFT clas is used for each "thread" in the automation.
@@ -176,7 +177,7 @@ LookList* RMFT2::LookListLoader(OPCODE op1, OPCODE op2, OPCODE op3) {
 
 /* static */ void RMFT2::begin() {
 
-  DIAG(F("EXRAIL RoutCode at =%P"),RouteCode);
+  //DIAG(F("EXRAIL RoutCode at =%P"),RouteCode);
     
   bool saved_diag=diag;
   diag=true;
@@ -251,6 +252,12 @@ if (compileFeatures & FEATURE_SIGNAL) {
       break;
     }
 
+    case OPCODE_ONSENSOR:
+        new EXRAILSensor(operand,progCounter+3,true );
+        break;
+    case OPCODE_ONBUTTON:
+        new EXRAILSensor(operand,progCounter+3,false );
+        break;
     case OPCODE_TURNOUT: {
       VPIN id=operand;
       int addr=getOperand(progCounter,1);
@@ -411,7 +418,7 @@ void RMFT2::createNewTask(int route, uint16_t cab) {
 
 void RMFT2::driveLoco(byte speed) {
   if (loco<=0) return;  // Prevent broadcast!
-  if (diag) DIAG(F("EXRAIL drive %d %d %d"),loco,speed,forward^invert);
+  //if (diag) DIAG(F("EXRAIL drive %d %d %d"),loco,speed,forward^invert);
  /* TODO.....
  power on appropriate track if DC or main if dcc
   if (TrackManager::getMainPowerMode()==POWERMODE::OFF) {
@@ -480,6 +487,7 @@ bool RMFT2::skipIfBlock() {
 }
 
 void RMFT2::loop() {
+  EXRAILSensor::checkAll();
 
   // Round Robin call to a RMFT task each time
   if (loopTask==NULL) return;
@@ -1066,7 +1074,7 @@ void RMFT2::loop2() {
   case OPCODE_ROUTE:
   case OPCODE_AUTOMATION:
   case OPCODE_SEQUENCE:
-    if (diag) DIAG(F("EXRAIL begin(%d)"),operand);
+    //if (diag) DIAG(F("EXRAIL begin(%d)"),operand);
     break;
     
   case OPCODE_AUTOSTART: // Handled only during begin process
@@ -1084,6 +1092,8 @@ void RMFT2::loop2() {
   case OPCODE_ONGREEN:
   case OPCODE_ONCHANGE:
   case OPCODE_ONTIME:
+  case OPCODE_ONBUTTON:
+  case OPCODE_ONSENSOR:
 #ifndef IO_NO_HAL
   case OPCODE_DCCTURNTABLE: // Turntable definition ignored at runtime
   case OPCODE_EXTTTURNTABLE:  // Turntable definition ignored at runtime
@@ -1146,7 +1156,7 @@ int16_t RMFT2::getSignalSlot(int16_t id) {
 
 /* static */ void RMFT2::doSignal(int16_t id,char rag) {
   if (!(compileFeatures & FEATURE_SIGNAL)) return; // dont compile code below
-  if (diag) DIAG(F(" doSignal %d %x"),id,rag);
+  //if (diag) DIAG(F(" doSignal %d %x"),id,rag);
   
   // Schedule any event handler for this signal change.
   // This will work even without a signal definition. 
@@ -1166,7 +1176,7 @@ int16_t RMFT2::getSignalSlot(int16_t id) {
   VPIN redpin=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+2);
   VPIN amberpin=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+4);
   VPIN greenpin=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+6);
-  if (diag) DIAG(F("signal %d %d %d %d %d"),sigid,id,redpin,amberpin,greenpin);
+  //if (diag) DIAG(F("signal %d %d %d %d %d"),sigid,id,redpin,amberpin,greenpin);
 
   VPIN sigtype=sigid & ~SIGNAL_ID_MASK;
 
@@ -1174,7 +1184,7 @@ int16_t RMFT2::getSignalSlot(int16_t id) {
     // A servo signal, the pin numbers are actually servo positions
     // Note, setting a signal to a zero position has no effect.
     int16_t servopos= rag==SIGNAL_RED? redpin: (rag==SIGNAL_GREEN? greenpin : amberpin);
-    if (diag) DIAG(F("sigA %d %d"),id,servopos);
+    //if (diag) DIAG(F("sigA %d %d"),id,servopos);
     if  (servopos!=0) IODevice::writeAnalogue(id,servopos,PCA9685::Bounce);
     return;  
   }
@@ -1292,7 +1302,7 @@ void RMFT2::rotateEvent(int16_t turntableId, bool change) {
 void RMFT2::clockEvent(int16_t clocktime, bool change) {
   // Hunt for an ONTIME for this time
   if (Diag::CMD)
-   DIAG(F("Looking for clock event at : %d"), clocktime);
+   DIAG(F("clockEvent at : %d"), clocktime);
   if (change) {
     onClockLookup->handleEvent(F("CLOCK"),clocktime);
     onClockLookup->handleEvent(F("CLOCK"),25*60+clocktime%60);
@@ -1302,7 +1312,7 @@ void RMFT2::clockEvent(int16_t clocktime, bool change) {
 void RMFT2::powerEvent(int16_t track, bool overload) {
   // Hunt for an ONOVERLOAD for this item
   if (Diag::CMD)
-   DIAG(F("Looking for Power event on track : %c"), track);
+   DIAG(F("powerEvent : %c"), track);
   if (overload) {
     onOverloadLookup->handleEvent(F("POWER"),track);
   }

EXRAIL2.h

@@ -73,7 +73,7 @@ enum OPCODE : byte {OPCODE_THROW,OPCODE_CLOSE,OPCODE_TOGGLE_TURNOUT,
              OPCODE_ROUTE_ACTIVE,OPCODE_ROUTE_INACTIVE,OPCODE_ROUTE_HIDDEN,
              OPCODE_ROUTE_DISABLED,
              OPCODE_STASH,OPCODE_CLEAR_STASH,OPCODE_CLEAR_ALL_STASH,OPCODE_PICKUP_STASH,
-
+             OPCODE_ONBUTTON,OPCODE_ONSENSOR,
              // OPcodes below this point are skip-nesting IF operations
              // placed here so that they may be skipped as a group
              // see skipIfBlock()

EXRAIL2MacroReset.h

@@ -114,6 +114,8 @@
 #undef ONGREEN
 #undef ONRED
 #undef ONROTATE
+#undef ONBUTTON
+#undef ONSENSOR
 #undef ONTHROW 
 #undef ONCHANGE
 #undef PARSE
@@ -279,6 +281,8 @@
 #define ONROTATE(turntable_id)
 #define ONTHROW(turnout_id) 
 #define ONCHANGE(sensor_id)
+#define ONSENSOR(sensor_id)
+#define ONBUTTON(sensor_id)
 #define PAUSE
 #define PIN_TURNOUT(id,pin,description...) 
 #define PRINT(msg) 

EXRAILMacros.h

@@ -553,6 +553,8 @@ int RMFT2::onLCCLookup[RMFT2::countLCCLookup];
 #endif
 #define ONTHROW(turnout_id) OPCODE_ONTHROW,V(turnout_id),
 #define ONCHANGE(sensor_id) OPCODE_ONCHANGE,V(sensor_id),
+#define ONSENSOR(sensor_id) OPCODE_ONSENSOR,V(sensor_id),
+#define ONBUTTON(sensor_id) OPCODE_ONBUTTON,V(sensor_id),
 #define PAUSE OPCODE_PAUSE,0,0,
 #define PICKUP_STASH(id) OPCODE_PICKUP_STASH,V(id),
 #define PIN_TURNOUT(id,pin,description...) OPCODE_PINTURNOUT,V(id),OPCODE_PAD,V(pin),

EXRAILSensor.cpp

@@ -0,0 +1,104 @@
+/*
+ *  © 2024 Chris Harlow
+ *  All rights reserved.
+ *  
+ *  This file is part of CommandStation-EX
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+/**********************************************************************
+EXRAILSensor represents a sensor that should be monitored in order
+to call an exrail ONBUTTON or ONCHANGE handler.
+These are created at EXRAIL startup and thus need no delete or listing
+capability.
+The basic logic is similar to that found in the Sensor class
+except that on the relevant change an EXRAIL thread is started.    
+**********************************************************************/
+
+#include "EXRAILSensor.h"
+#include "EXRAIL2.h"
+
+void EXRAILSensor::checkAll() {
+  if (firstSensor == NULL) return;  // No sensors to be scanned
+  if (readingSensor == NULL) { 
+    // Not currently scanning sensor list
+    unsigned long thisTime = micros();
+    if (thisTime - lastReadCycle < cycleInterval) return;
+    // Required time has elapsed since last read cycle started,
+    // so initiate new scan through the sensor list
+    readingSensor = firstSensor;
+    lastReadCycle = thisTime;
+  }
+  
+  // Loop until either end of list is encountered or we pause for some reason
+  byte sensorCount = 0;
+
+  while (readingSensor != NULL) {
+    bool pause=readingSensor->check();
+    // Move to next sensor in list.
+    readingSensor = readingSensor->nextSensor;
+    // Currently process max of 16 sensors per entry.
+    // Performance measurements taken during development indicate that, with 128 sensors configured
+    // on 8x 16-pin MCP23017 GPIO expanders with polling (no change notification), all inputs can be read from the devices
+    // within 1.4ms (400Mhz I2C bus speed), and a full cycle of checking 128 sensors for changes takes under a millisecond.
+    if (pause || (++sensorCount)>=16) return; 
+  }
+} 
+
+bool EXRAILSensor::check() {
+  // check for debounced change in this sensor 
+  inputState = IODevice::read(pin);
+
+  // Check if changed since last time, and process changes.
+  if (inputState == active) {// no change
+    latchDelay = minReadCount; // Reset counter
+    return false;  // no change 
+  }
+
+    // Change detected ... has it stayed changed for long enough
+    if (latchDelay > 0) {
+      latchDelay--;
+      return false; 
+    } 
+    
+    // change validated, act on it.
+    active = inputState;
+    latchDelay = minReadCount;  // Reset debounce counter
+    if (onChange || active) {
+      new RMFT2(progCounter);
+      return true;  // Don't check any more sensors on this entry
+    }
+    return false; 
+}
+
+EXRAILSensor::EXRAILSensor(VPIN _pin, int _progCounter, bool _onChange) {
+  // Add to the start of the list
+  //DIAG(F("ONthing vpin=%d at %d"), _pin, _progCounter);
+  nextSensor = firstSensor;
+  firstSensor = this;
+
+  pin=_pin;
+  progCounter=_progCounter;
+  onChange=_onChange;
+
+  IODevice::configureInput(pin, true);   
+  active = IODevice::read(pin);
+  inputState = active;
+  latchDelay = minReadCount;
+}
+
+EXRAILSensor *EXRAILSensor::firstSensor=NULL;
+EXRAILSensor *EXRAILSensor::readingSensor=NULL;
+unsigned long EXRAILSensor::lastReadCycle=0;

EXRAILSensor.h

@@ -0,0 +1,50 @@
+/*
+ *  © 2024 Chris Harlow
+ *  All rights reserved.
+ *  
+ *  This file is part of CommandStation-EX
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#ifndef EXRAILSensor_h
+#define EXRAILSensor_h 
+#include "IODevice.h"
+class EXRAILSensor {
+  static EXRAILSensor * firstSensor;
+ static EXRAILSensor * readingSensor;
+ static unsigned long lastReadCycle;
+ 
+  public:
+  static void checkAll();
+  
+  EXRAILSensor(VPIN _pin, int _progCounter, bool _onChange);
+  bool check();
+  
+  private:
+  static const unsigned int cycleInterval = 10000; // min time between consecutive reads of each sensor in microsecs.
+                                                   // should not be less than device scan cycle time.
+  static const byte minReadCount = 4; // number of additional scans before acting on change
+                                        // E.g. 1 means that a change is ignored for one scan and actioned on the next.
+                                        // Max value is 63
+  
+  EXRAILSensor* nextSensor;
+  VPIN pin; 
+  int progCounter; 
+  bool active; 
+  bool inputState;
+  bool onChange;
+  byte latchDelay;
+};
+#endif

GITHUB_SHA.h

@@ -1 +1 @@
-#define GITHUB_SHA "devel-202404012205Z"
+#define GITHUB_SHA "devel-202404061747Z"

IO_HALDisplay.h

@@ -1,7 +1,9 @@
 /*
- *  © 2023, Neil McKechnie. All rights reserved.
+ *  © 2024, Paul Antoine
+ *  © 2023, Neil McKechnie
+ *  All rights reserved.
  *  
- *  This file is part of DCC++EX API
+ *  This file is part of DCC-EX API
  *
  *  This is free software: you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -112,13 +114,14 @@ protected:
     // Fill buffer with spaces
     memset(_buffer, ' ', _numCols*_numRows);
 
-    _displayDriver->clearNative();
-
     // Add device to list of HAL devices (not necessary but allows
     // status to be displayed using <D HAL SHOW> and device to be
     // reinitialised using <D HAL RESET>).
     IODevice::addDevice(this);
 
+    // Moved after addDevice() to ensure I2CManager.begin() has been called fisrt
+    _displayDriver->clearNative();
+
     // Also add this display to list of display handlers
     DisplayInterface::addDisplay(displayNo);
 

MotorDriver.cpp

@@ -336,8 +336,6 @@ void MotorDriver::setDCSignal(byte speedcode, uint8_t frequency /*default =0*/)
   if (tSpeed <= 1) brake = 255;
   else if (tSpeed >= 127) brake = 0;
   else  brake = 2 * (128-tSpeed);
-  if (invertBrake)
-    brake=255-brake;
 
   { // new block because of variable f
 #if defined(ARDUINO_ARCH_ESP32) || defined(ARDUINO_ARCH_STM32)
@@ -349,12 +347,12 @@ void MotorDriver::setDCSignal(byte speedcode, uint8_t frequency /*default =0*/)
       }
     }
 #endif
-    //DIAG(F("Brake pin %d freqency %d"), brakePin, f);
+    //DIAG(F("Brake pin %d value %d freqency %d"), brakePin, brake, f);
+    DCCTimer::DCCEXanalogWrite(brakePin, brake, invertBrake);
     DCCTimer::DCCEXanalogWriteFrequency(brakePin, f); // set DC PWM frequency
-    DCCTimer::DCCEXanalogWrite(brakePin,brake);
 #else // all AVR here
     DCCTimer::DCCEXanalogWriteFrequency(brakePin, frequency); // frequency steps
-    analogWrite(brakePin,brake);
+    analogWrite(brakePin, invertBrake ? 255-brake : brake);
 #endif
   }
 
@@ -404,26 +402,26 @@ void MotorDriver::setDCSignal(byte speedcode, uint8_t frequency /*default =0*/)
 void MotorDriver::throttleInrush(bool on) {
   if (brakePin == UNUSED_PIN)
     return;
-  if ( !(trackMode & (TRACK_MODE_MAIN | TRACK_MODE_PROG | TRACK_MODE_EXT)))
+  if ( !(trackMode & (TRACK_MODE_MAIN | TRACK_MODE_PROG | TRACK_MODE_EXT | TRACK_MODE_BOOST)))
     return;
   byte duty = on ? 207 : 0; // duty of 81% at 62500Hz this gives pauses of 3usec
-  if (invertBrake)
-    duty = 255-duty;
 #if defined(ARDUINO_ARCH_ESP32)
   if(on) {
-    DCCTimer::DCCEXanalogWrite(brakePin,duty);
-    DCCTimer::DCCEXanalogWriteFrequency(brakePin, 7); // 7 means max
+    DCCTimer::DCCEXInrushControlOn(brakePin, duty, invertBrake);
   } else {
-    ledcDetachPin(brakePin);
+    ledcDetachPin(brakePin); // not DCCTimer::DCCEXledcDetachPin() as we have not
+                             // registered the pin in the pin to channel array
   }
 #elif defined(ARDUINO_ARCH_STM32)
   if(on) {
     DCCTimer::DCCEXanalogWriteFrequency(brakePin, 7); // 7 means max
-    DCCTimer::DCCEXanalogWrite(brakePin,duty);
+    DCCTimer::DCCEXanalogWrite(brakePin,duty,invertBrake);
   } else {
     pinMode(brakePin, OUTPUT);
   }
 #else // all AVR here
+  if (invertBrake)
+    duty = 255-duty;
   if(on){
     DCCTimer::DCCEXanalogWriteFrequency(brakePin, 7); // 7 means max
   }

MotorDriver.h

@@ -193,13 +193,14 @@ class MotorDriver {
       }
     };
     inline pinpair getSignalPin() { return pinpair(signalPin,signalPin2); };
+    inline int8_t getBrakePinSigned() { return invertBrake ? -brakePin : brakePin; };
     void setDCSignal(byte speedByte, uint8_t frequency=0);
     void throttleInrush(bool on);
     inline void detachDCSignal() {
 #if defined(__arm__)
       pinMode(brakePin, OUTPUT);
 #elif defined(ARDUINO_ARCH_ESP32)
-      ledcDetachPin(brakePin);
+      DCCTimer::DCCEXledcDetachPin(brakePin);
 #else
       setDCSignal(128);
 #endif

Release_Notes/Exrail mods.txt

@@ -0,0 +1,98 @@
+
+BLINK(vpin, onMs,offMs)
+
+which will start a vpin blinking until such time as it is SET, RESET or set by a signal operation such as RED, AMBER, GREEN. 
+
+BLINK returns immediately, the blinking is autonomous. 
+
+This means a signal that always blinks amber could be done like this:
+
+SIGNAL(30,31,32)
+ONAMBER(30) BLINK(31,500,500) DONE
+
+The RED or GREEN calls will turn off the amber blink automatically.
+
+Alternatively a signal that has normal AMBER and flashing AMBER could be like this:
+
+#define FLASHAMBER(signal) \
+                AMBER(signal) \
+                BLINK(signal+1,500,500)
+  
+  (Caution: this assumes that the amber pin is redpin+1)
+
+  ==
+
+  FTOGGLE(function)
+   Toggles the current loco function (see FON and FOFF)
+
+  XFTOGGLE(loco,function)
+     Toggles the function on given loco. (See XFON, XFOFF)
+
+  TOGGLE_TURNOUT(id) 
+      Toggles the turnout (see CLOSE, THROW)
+
+  STEALTH_GLOBAL(code) 
+      ADVANCED C++ users only.
+      Inserts code such as static variables and functions that
+      may be utilised by multiple STEALTH operations.
+
+
+// 5.2.34 - <A address aspect> Command fopr DCC Extended Accessories.
+This command sends an extended accessory packet to the track, Normally used to set
+a signal aspect. Aspect numbers are undefined as sdtandards except for 0 which is
+always considered a stop.
+
+//        - Exrail ASPECT(address,aspect) for above.
+     The ASPECT command sents an aspect to a DCC accessory using the same logic as 
+     <A aspect address>.
+     
+//        - EXRAIL DCCX_SIGNAL(Address,redAspect,amberAspect,greenAspect)
+      This defines a signal (with id same as dcc address) that can be operated
+      by the RED/AMBER/GREEN commands.   In each case the command uses the signal
+      address to refer to the signal and the aspect chosen depends on the use of the RED
+      AMBER or GREEN command sent. Other aspects may be sent but will require the
+      direct use of the ASPECT command.
+      The IFRED/IFAMBER/IFGREEN  and ONRED/ONAMBER/ONGREEN commands contunue to operate
+      as for any other signal type. It is important to be aware that use of the ASPECT
+      or <A> commands will correctly set the IF flags and call the ON handlers if ASPECT
+      is used to set one of the three aspects defined in the DCCX_SIGNAL command. 
+      Direct use of other aspects does not affect the signal flags.
+      ASPECT and <A> can be used withput defining any signal if tyhe flag management or
+      ON event handlers are not required.    
+
+// 5.2.33 - Exrail CONFIGURE_SERVO(vpin,pos1,pos2,profile)
+   This macro offsers a more convenient way of performing the HAL call in halSetup.h
+    In halSetup.h --- IODevice::configureServo(101,300,400,PCA9685::slow);
+    In myAutomation.h --- CONFIGURE_SERVO(101,300,400,slow)
+
+// 5.2.32 - Railcom Cutout (Initial trial Mega2560 only)
+    This cutout will only work on a Mega2560 with a single EX8874 motor shield
+    configured in the normal way with the main track brake pin on pin 9.
+    <C RAILCOM ON>    Turns on the cutout mechanism.
+    <C RAILCOM OFF>   Tirns off the cutout. (This is the default)
+    <C RAILCOM DEBUG> ONLY to be used by developers used for waveform diagnostics.
+       (In DEBUG mode the main track idle packets are replaced with reset packets, This
+       makes it far easier to see the preambles and cutouts on a logic analyser or scope.)
+
+// 5.2.31 - Exrail JMRI_SENSOR(vpin [,count]) creates <S> types.
+       This Macro causes the creation of JMRI <S> type sensors in a way that is 
+       simpler than repeating lines of <S> commands.
+         JMRI_SENSOR(100)   is equenvelant to <S 100 100 1>
+         JMRI_SENSOR(100,16) will create <S> type sensors for vpins 100-115.
+
+// 5.2.26 - Silently ignore overridden HAL defaults
+//        - include HAL_IGNORE_DEFAULTS macro in EXRAIL
+            The HAL_IGNORE_DEFAULTS command, anywhere in myAutomation.h will 
+            prevent the startup code from trying the default I2C sensors/servos.  
+// 5.2.24 - Exrail macro asserts to catch 
+//            : duplicate/missing automation/route/sequence/call ids
+//            : latches and reserves out of range
+//            : speeds out of range
+            Causes compiler time messages for EXRAIL issues that would normally
+            only be discovered by things going wrong at run time. 
+// 5.2.13 - EXRAIL STEALTH
+            Permits a certain level of C++ code to be embedded as a single step in
+            an exrail sequence. Serious engineers only.
+
+// 5.2.9  - EXRAIL STASH feature 
+//        - Added ROUTE_DISABLED macro in EXRAIL

TrackManager.cpp

@@ -38,8 +38,8 @@
 	    if (track[t]->getMode()==findmode)	\
                 track[t]->function;
 
-MotorDriver * TrackManager::track[MAX_TRACKS];
-int16_t TrackManager::trackDCAddr[MAX_TRACKS];
+MotorDriver * TrackManager::track[MAX_TRACKS] = { NULL };
+int16_t TrackManager::trackDCAddr[MAX_TRACKS] = { 0 };
 
 int8_t TrackManager::lastTrack=-1;
 bool TrackManager::progTrackSyncMain=false; 
@@ -251,18 +251,47 @@ bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr
     } else {
       track[trackToSet]->makeProgTrack(false); // only the prog track knows it's type
     }
-    track[trackToSet]->setMode(mode);
-    trackDCAddr[trackToSet]=dcAddr;
 
     // When a track is switched, we must clear any side effects of its previous 
     // state, otherwise trains run away or just dont move.
 
     // This can be done BEFORE the PWM-Timer evaluation (methinks)
-    if (!(mode & TRACK_MODE_DC)) {
+    if (mode & TRACK_MODE_DC) {
+      if (trackDCAddr[trackToSet] != dcAddr) {
+	// new or changed DC Addr, run the new setup
+	if (trackDCAddr[trackToSet] != 0) {
+	  // if we change dcAddr and not only
+	  // change from another mode,
+	  // first detach old DC signal
+	  track[trackToSet]->detachDCSignal();
+	}
+#ifdef ARDUINO_ARCH_ESP32
+	int trackfound = -1;
+	FOR_EACH_TRACK(t) {
+	  //DIAG(F("Checking track %c mode %x dcAddr %d"), 'A'+t, track[t]->getMode(), trackDCAddr[t]);
+	  if (t != trackToSet                          // not our track
+	      && (track[t]->getMode() & TRACK_MODE_DC) // right mode
+	      && trackDCAddr[t] == dcAddr) {           // right addr
+	    //DIAG(F("Found track %c"), 'A'+t);
+	    trackfound = t;
+	    break;
+	  }
+	}
+	if (trackfound > -1) {
+	  DCCTimer::DCCEXanalogCopyChannel(track[trackfound]->getBrakePinSigned(),
+					   track[trackToSet]->getBrakePinSigned());
+	}
+#endif
+      }
+      // set future DC Addr;
+      trackDCAddr[trackToSet]=dcAddr;
+    } else {
       // DCC tracks need to have set the PWM to zero or they will not work.
       track[trackToSet]->detachDCSignal();
       track[trackToSet]->setBrake(false);
+      trackDCAddr[trackToSet]=0; // clear that an addr is set for DC as this is not a DC track
     }
+    track[trackToSet]->setMode(mode);
 
     // BOOST:
     //  Leave it as is

config.example.h

@@ -211,6 +211,19 @@ The configuration file for DCC-EX Command Station
 // #define DISABLE_VDPY
 // #define ENABLE_VDPY
 
+/////////////////////////////////////////////////////////////////////////////////////
+// DISABLE / ENABLE DIAG
+//
+// To diagose different errors, you can turn on differnet messages. This costs
+// program memory which we do not have enough on the Uno and Nano, so it is
+// by default DISABLED on those. If you think you can fit it (for example
+// having disabled some of the features above) you can enable it with
+// ENABLE_DIAG. You can even disable it on all other CPUs with
+// DISABLE_DIAG
+//
+// #define DISABLE_DIAG
+// #define ENABLE_DIAG
+
 /////////////////////////////////////////////////////////////////////////////////////
 // REDEFINE WHERE SHORT/LONG ADDR break is. According to NMRA the last short address
 // is 127 and the first long address is 128. There are manufacturers which have

defines.h

@@ -220,9 +220,15 @@
 // 
 #if defined(ARDUINO_AVR_NANO) || defined(ARDUINO_AVR_UNO)
 #define IO_NO_HAL // HAL too big whatever you disable otherwise
+
 #ifndef ENABLE_VDPY
 #define DISABLE_VDPY
 #endif
+
+#ifndef ENABLE_DIAG
+#define DISABLE_DIAG
+#endif
+
 #endif
 
 #if __has_include ( "myAutomation.h")

version.h

@@ -3,7 +3,19 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.2.42"
+#define VERSION "5.2.48"
+// 5.2.48 - Bugfix: HALDisplay was generating I2C traffic prior to I2C being initialised
+// 5.2.47 - EXRAIL additions:
+//          STEALTH_GLOBAL
+//          BLINK
+//          TOGGLE_TURNOUT
+//          FTOGGLE, XFTOGGLE
+//          Reduced code-developmenmt DIAG noise
+// 5.2.46 - Support for extended consist CV20 in <R> and <W id>
+//        - New cmd <W CONSIST id [REVERSE]> to handle long/short consist ids
+// 5.2.45 - ESP32 Trackmanager reset cab number to 0 when track is not DC
+//          ESP32 fix PWM LEDC inverted pin mode
+//          ESP32 rewrite PWM LEDC to use pin mux
 // 5.2.42 - ESP32 Bugfix: Uninitialized stack variable
 // 5.2.41 - Update rotary encoder default address to 0x67
 // 5.2.40 - Allow no shield