version

[Feat] Added WIFI_FORCE_AP option to config

CommandStation-EX.ino

@@ -30,6 +30,7 @@
  *  © 2021 Neil McKechnie
  *  © 2020-2021 Chris Harlow, Harald Barth, David Cutting,
  *  Fred Decker, Gregor Baues, Anthony W - Dayton
+ *  © 2023 Nathan Kellenicki
  *  All rights reserved.
  *
  *  This file is part of CommandStation-EX
@@ -95,11 +96,11 @@ void setup()
   // Start Ethernet if it exists
 #ifndef ARDUINO_ARCH_ESP32
 #if WIFI_ON
-  WifiInterface::setup(WIFI_SERIAL_LINK_SPEED, F(WIFI_SSID), F(WIFI_PASSWORD), F(WIFI_HOSTNAME), IP_PORT, WIFI_CHANNEL);
+  WifiInterface::setup(WIFI_SERIAL_LINK_SPEED, F(WIFI_SSID), F(WIFI_PASSWORD), F(WIFI_HOSTNAME), IP_PORT, WIFI_CHANNEL, WIFI_FORCE_AP);
 #endif // WIFI_ON
 #else
   // ESP32 needs wifi on always
-  WifiESP::setup(WIFI_SSID, WIFI_PASSWORD, WIFI_HOSTNAME, IP_PORT, WIFI_CHANNEL);
+  WifiESP::setup(WIFI_SSID, WIFI_PASSWORD, WIFI_HOSTNAME, IP_PORT, WIFI_CHANNEL, WIFI_FORCE_AP);
 #endif // ARDUINO_ARCH_ESP32
 
 #if ETHERNET_ON

DCCEXParser.cpp

@@ -487,9 +487,9 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
 #endif
 	  else break; // will reply <X>
 	}
+        TrackManager::setJoin(join);
         if (main) TrackManager::setMainPower(POWERMODE::ON);
         if (prog) TrackManager::setProgPower(POWERMODE::ON);
-        TrackManager::setJoin(join);
 
         CommandDistributor::broadcastPower();
         return;
@@ -516,12 +516,12 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
 	  else break; // will reply <X>
 	}
 
+        TrackManager::setJoin(false);
         if (main) TrackManager::setMainPower(POWERMODE::OFF);
         if (prog) {
             TrackManager::progTrackBoosted=false;  // Prog track boost mode will not outlive prog track off
             TrackManager::setProgPower(POWERMODE::OFF);
         }
-        TrackManager::setJoin(false);
 
         CommandDistributor::broadcastPower();
         return;

DCCRMT.cpp

@@ -194,8 +194,10 @@ int RMTChannel::RMTfillData(const byte buffer[], byte byteCount, byte repeatCoun
   setDCCBit1(data + bitcounter-1);     // overwrite previous zero bit with one bit
   setEOT(data + bitcounter++);         // EOT marker
   dataLen = bitcounter;
+  noInterrupts();                      // keep dataReady and dataRepeat consistnet to each other
   dataReady = true;
   dataRepeat = repeatCount+1;         // repeatCount of 0 means send once
+  interrupts();
   return 0;
 }
 
@@ -212,6 +214,8 @@ void IRAM_ATTR RMTChannel::RMTinterrupt() {
   if (dataReady) {            // if we have new data, fill while preamble is running
     rmt_fill_tx_items(channel, data, dataLen, preambleLen-1);
     dataReady = false;
+    if (dataRepeat == 0)       // all data should go out at least once
+      DIAG(F("Channel %d DCC signal lost data"), channel);
   }
   if (dataRepeat > 0)         // if a repeat count was specified, work on that
     dataRepeat--;

DCCTimerESP.cpp

@@ -180,8 +180,8 @@ void DCCTimer::DCCEXanalogWrite(uint8_t pin, int value) {
           return;
       }
       pin_to_channel[pin] = --cnt_channel;
-      ledcAttachPin(pin, cnt_channel);
       ledcSetup(cnt_channel, 1000, 8);
+      ledcAttachPin(pin, cnt_channel);
     } else {
       ledcAttachPin(pin, pin_to_channel[pin]);
     }

DCCWaveform.cpp

@@ -247,6 +247,9 @@ void DCCWaveform::schedulePacket(const byte buffer[], byte byteCount, byte repea
   pendingPacket[byteCount] = checksum;
   pendingLength = byteCount + 1;
   pendingRepeats = repeats;
+// DIAG repeated commands (accesories)
+//  if (pendingRepeats > 0)
+//    DIAG(F("Repeats=%d on %s track"), pendingRepeats, isMainTrack ? "MAIN" : "PROG");
   // The resets will be zero not only now but as well repeats packets into the future
   clearResets(repeats+1);
   {

GITHUB_SHA.h

@@ -1 +1 @@
-#define GITHUB_SHA "devel-202306222129Z"
+#define GITHUB_SHA "devel-202307250927Z"

IO_EXTurntable.h

@@ -50,12 +50,12 @@ EXTurntable::EXTurntable(VPIN firstVpin, int nPins, I2CAddress I2CAddress) {
 // Initialisation of EXTurntable
 void EXTurntable::_begin() {
   I2CManager.begin();
-  I2CManager.setClock(1000000);
   if (I2CManager.exists(_I2CAddress)) {
 #ifdef DIAG_IO
     _display();
 #endif
   } else {
+    DIAG(F("EX-Turntable I2C:%s device not found"), _I2CAddress.toString());
     _deviceState = DEVSTATE_FAILED;
   }
 }

IO_RotaryEncoder.h

@@ -134,12 +134,13 @@ private:
     }
   }
 
-  // Device specific read function
+  // Return the position sent by the rotary encoder software
   int _readAnalogue(VPIN vpin) override {
     if (_deviceState == DEVSTATE_FAILED) return 0;
     return _position;
   }
 
+  // Send the feedback value to the rotary encoder software
   void _write(VPIN vpin, int value) override {
     if (vpin == _firstVpin + 1) {
       if (value != 0) value = 0x01;
@@ -148,9 +149,12 @@ private:
     }
   }
 
+  // Send a position update to the rotary encoder software
+  // To be valid, must be 0 to 255, and different to the current position
+  // If the current position is the same, it was initiated by the rotary encoder
   void _writeAnalogue(VPIN vpin, int position, uint8_t profile, uint16_t duration) override {
     if (vpin == _firstVpin + 2) {
-      if (position >= 0 && position <= 255) {
+      if (position >= 0 && position <= 255 && position != _position) {
         byte newPosition = position & 0xFF;
         byte _positionBuffer[2] = {RE_MOVE, newPosition};
         I2CManager.write(_I2CAddress, _positionBuffer, 2);

MotorDriver.cpp

@@ -135,7 +135,11 @@ MotorDriver::MotorDriver(int16_t power_pin, byte signal_pin, byte signal_pin2, i
   // float calculations or libraray code. 
   senseFactorInternal=sense_factor * senseScale; 
   tripMilliamps=trip_milliamps;
-  rawCurrentTripValue=mA2raw(trip_milliamps);
+#ifdef MAX_CURRENT
+  if (MAX_CURRENT > 0 && MAX_CURRENT < tripMilliamps)
+    tripMilliamps = MAX_CURRENT;
+#endif
+  rawCurrentTripValue=mA2raw(tripMilliamps);
 
   if (rawCurrentTripValue + senseOffset > ADCee::ADCmax()) {
     // This would mean that the values obtained from the ADC never
@@ -169,7 +173,11 @@ bool MotorDriver::isPWMCapable() {
 
 void MotorDriver::setPower(POWERMODE mode) {
   if (powerMode == mode) return;
-  bool on=mode==POWERMODE::ON;
+  //DIAG(F("Track %c POWERMODE=%d"), trackLetter, (int)mode);
+  lastPowerChange[(int)mode] = micros();
+  if (mode == POWERMODE::OVERLOAD)
+    globalOverloadStart = lastPowerChange[(int)mode];
+  bool on=(mode==POWERMODE::ON || mode ==POWERMODE::ALERT);
   if (on) {
     // when switching a track On, we need to check the crrentOffset with the pin OFF
     if (powerMode==POWERMODE::OFF && currentPin!=UNUSED_PIN) {
@@ -209,8 +217,8 @@ bool MotorDriver::canMeasureCurrent() {
   return currentPin!=UNUSED_PIN;
 }
 /*
- * Return the current reading as pin reading 0 to 1023. If the fault
- * pin is activated return a negative current to show active fault pin.
+ * Return the current reading as pin reading 0 to max resolution (1024 or 4096).
+ * If the fault pin is activated return a negative current to show active fault pin.
  * As there is no -0, cheat a little and return -1 in that case.
  * 
  * senseOffset handles the case where a shield returns values above or below 
@@ -339,7 +347,35 @@ void MotorDriver::setDCSignal(byte speedcode) {
     interrupts();
   }
 }
-
+void MotorDriver::throttleInrush(bool on) {
+  if (brakePin == UNUSED_PIN)
+    return;
+  if ( !(trackMode & (TRACK_MODE_MAIN | TRACK_MODE_PROG | TRACK_MODE_EXT)))
+    return;
+  byte duty = on ? 208 : 0;
+  if (invertBrake)
+    duty = 255-duty;
+#if defined(ARDUINO_ARCH_ESP32)
+  if(on) {
+    DCCTimer::DCCEXanalogWrite(brakePin,duty);
+    DCCTimer::DCCEXanalogWriteFrequency(brakePin, 62500);
+  } else {
+    ledcDetachPin(brakePin);
+  }
+#else
+  if(on){
+#if defined(ARDUINO_AVR_UNO)
+  TCCR2B = (TCCR2B & B11111000) | B00000001; // div 1 is max
+#endif
+#if defined(ARDUINO_AVR_MEGA) || defined(ARDUINO_AVR_MEGA2560)
+  TCCR2B = (TCCR2B & B11111000) | B00000001; // div 1 is max
+  TCCR4B = (TCCR4B & B11111000) | B00000001; // div 1 is max
+  TCCR5B = (TCCR5B & B11111000) | B00000001; // div 1 is max
+#endif
+  }
+  analogWrite(brakePin,duty);
+#endif
+}
 unsigned int MotorDriver::raw2mA( int raw) {
   //DIAG(F("%d = %d * %d / %d"), (int32_t)raw * senseFactorInternal / senseScale, raw, senseFactorInternal, senseScale);
   return (int32_t)raw * senseFactorInternal / senseScale;
@@ -368,112 +404,169 @@ void  MotorDriver::getFastPin(const FSH* type,int pin, bool input, FASTPIN & res
     // DIAG(F(" port=0x%x, inoutpin=0x%x, isinput=%d, mask=0x%x"),port, result.inout,input,result.maskHIGH);
 }
 
+///////////////////////////////////////////////////////////////////////////////////////////
+// checkPowerOverload(useProgLimit, trackno)
+// bool useProgLimit: Trackmanager knows if this track is in prog mode or in main mode
+// byte trackno: trackmanager knows it's number (could be skipped?)
+//
+// Short ciruit handling strategy:
+//
+// There are the following power states: ON ALERT OVERLOAD OFF
+// OFF state is only changed to/from manually. Power is on
+// during ON and ALERT. Power is off during OVERLOAD and OFF.
+// The overload mechanism changes between the other states like
+//
+// ON -1-> ALERT -2-> OVERLOAD -3-> ALERT -4-> ON
+// or
+// ON -1-> ALERT -4-> ON
+//
+// Times are in class MotorDriver (MotorDriver.h).
+//
+// 1. ON to ALERT:
+// Transition on fault pin condition or current overload
+//
+// 2. ALERT to OVERLOAD:
+// Transition happens if different timeouts have elapsed.
+// If only the fault pin is active, timeout is
+// POWER_SAMPLE_IGNORE_FAULT_LOW (100ms)
+// If only overcurrent is detected, timeout is
+// POWER_SAMPLE_IGNORE_CURRENT (100ms)
+// If fault pin and overcurrent are active, timeout is
+// POWER_SAMPLE_IGNORE_FAULT_HIGH (5ms)
+// Transition to OVERLOAD turns off power to the affected
+// output (unless fault pins are shared)
+// If the transition conditions are not fullfilled,
+// transition according to 4 is tested.
+//
+// 3. OVERLOAD to ALERT
+// Transiton happens when timeout has elapsed, timeout
+// is named power_sample_overload_wait. It is started
+// at POWER_SAMPLE_OVERLOAD_WAIT (40ms) at first entry
+// to OVERLOAD and then increased by a factor of 2
+// at further entries to the OVERLOAD condition. This
+// happens until POWER_SAMPLE_RETRY_MAX (10sec) is reached.
+// power_sample_overload_wait is reset by a poweroff or
+// a POWER_SAMPLE_ALL_GOOD (5sec) period during ON.
+// After timeout power is turned on again and state
+// goes back to ALERT.
+//
+// 4. ALERT to ON
+// Transition happens by watching the current and fault pin
+// samples during POWER_SAMPLE_ALERT_GOOD (20ms) time. If
+// values have been good during that time, transition is
+// made back to ON. Note that even if state is back to ON,
+// the power_sample_overload_wait time is first reset
+// later (see above).
+//
+// The time keeping is handled by timestamps lastPowerChange[]
+// which are set by each power change and by lastBadSample which
+// keeps track if conditions during ALERT have been good enough
+// to go back to ON. The time differences are calculated by
+// microsSinceLastPowerChange().
+//
+
 void MotorDriver::checkPowerOverload(bool useProgLimit, byte trackno) {
-  int tripValue= useProgLimit?progTripValue:getRawCurrentTripValue();
 
   switch (powerMode) {
-    case POWERMODE::OFF:
-      if (overloadNow) {
-	// reset overload condition as we have just turned off power
-	// DIAG(F("OVERLOAD POFF OFF"));
-	overloadNow=false;
-	setLastPowerChange();
-      }
-      if (microsSinceLastPowerChange() > POWER_SAMPLE_ALL_GOOD) {
-	power_sample_overload_wait = POWER_SAMPLE_OVERLOAD_WAIT;
-      }
-      break;
-    case POWERMODE::ON:
-      // Check current
-      lastCurrent=getCurrentRaw();
-      if (lastCurrent < 0) {
-	// We have a fault pin condition to take care of
-	if (!overloadNow) {
-	  // turn on overload condition as fault pin has gone active
-	  // DIAG(F("OVERLOAD FPIN ON"));
-	  overloadNow=true;
-	  setLastPowerChangeOverload();
-	}
-	lastCurrent = -lastCurrent;
-	{
-	  if (lastCurrent < tripValue) {
-	    if (power_sample_overload_wait <= (POWER_SAMPLE_OVERLOAD_WAIT * 10) &&    // almost virgin
-		microsSinceLastPowerChange() < POWER_SAMPLE_IGNORE_FAULT_LOW) {
-	      // Ignore 50ms fault pin if no current
-	      DIAG(F("TRACK %c FAULT PIN (50ms ignore)"), trackno + 'A');
-	      break;
-	    }
-	    lastCurrent = tripValue; // exaggerate so condition below (*) is true
-	  } else {
-	    if (power_sample_overload_wait <= POWER_SAMPLE_OVERLOAD_WAIT &&   // virgin
-		microsSinceLastPowerChange() < POWER_SAMPLE_IGNORE_FAULT_HIGH) {
-              // Ignore 5ms fault pin if we see current
-	      DIAG(F("TRACK %c FAULT PIN (5ms ignore)"), trackno + 'A');
-	      break;
-	    }
-	  }
-	  DIAG(F("TRACK %c FAULT PIN"), trackno + 'A');
-	}
-      }
-      // // //
-      // above we looked at fault pin, below we look at current
-      // // //
-      if (lastCurrent < tripValue) { // see above (*)
-	if (overloadNow) {
-	  // current is below trip value, turn off overload condition
-	  // DIAG(F("OVERLOAD PON OFF"));
-	  overloadNow=false;
-	  setLastPowerChange();
-	}
-	if (microsSinceLastPowerChange() > POWER_SAMPLE_ALL_GOOD) {
-	  power_sample_overload_wait = POWER_SAMPLE_OVERLOAD_WAIT;
-	}
+
+  case POWERMODE::OFF: {
+    lastPowerMode = POWERMODE::OFF;
+    power_sample_overload_wait = POWER_SAMPLE_OVERLOAD_WAIT;
+    break;
+  }
+
+  case POWERMODE::ON: {
+    lastPowerMode = POWERMODE::ON;
+    bool cF = checkFault();
+    bool cC = checkCurrent(useProgLimit);
+    if(cF || cC ) {
+      if (cC) {
+	unsigned int mA=raw2mA(lastCurrent);
+	DIAG(F("TRACK %c ALERT %s %dmA"), trackno + 'A',
+	     cF ? "FAULT" : "",
+	     mA);
       } else {
-	// too much current
-	if (!overloadNow) {
-	  // current is over trip value, turn on overload condition
-	  // DIAG(F("OVERLOAD PON ON"));
-	  overloadNow=true;
-	  setLastPowerChange();
-	}
-	unsigned long uSecs = microsSinceLastPowerChange();
-	if (power_sample_overload_wait > POWER_SAMPLE_OVERLOAD_WAIT ||    // not virgin
-	    uSecs > POWER_SAMPLE_OFF_DELAY) {
-	  // Overload has existed longer than delay (typ. 10ms)
-	  setPower(POWERMODE::OVERLOAD);
-	  if (overloadNow) {
-	    // the setPower just turned off, so overload is now gone
-	    // DIAG(F("OVERLOAD PON OFF"));
-	    overloadNow=false;
-	    setLastPowerChangeOverload();
-	  }
-	  unsigned int mA=raw2mA(lastCurrent);
-	  unsigned int maxmA=raw2mA(tripValue);
-	  DIAG(F("TRACK %c POWER OVERLOAD %4dmA (max %4dmA) detected after %4M. Pause %4M"),
-	       trackno + 'A', mA, maxmA, uSecs, power_sample_overload_wait);
-	}
+	DIAG(F("TRACK %c ALERT FAULT"), trackno + 'A');
       }
+      setPower(POWERMODE::ALERT);
       break;
-  case POWERMODE::OVERLOAD:
-  {
-    // Try setting it back on after the OVERLOAD_WAIT
-    unsigned long mslpc = (commonFaultPin ? (micros() - globalOverloadStart) : microsSinceLastPowerChange());
+    }
+    // all well
+    if (microsSinceLastPowerChange(POWERMODE::ON) > POWER_SAMPLE_ALL_GOOD) {
+      power_sample_overload_wait = POWER_SAMPLE_OVERLOAD_WAIT;
+    }
+    break;
+  }
+
+  case POWERMODE::ALERT: {
+    // set local flags that handle how much is output to diag (do not output duplicates)
+    bool notFromOverload = (lastPowerMode != POWERMODE::OVERLOAD);
+    bool powerModeChange = (powerMode != lastPowerMode);
+    unsigned long now = micros();
+    if (powerModeChange)
+      lastBadSample = now;
+    lastPowerMode = POWERMODE::ALERT;
+    // check how long we have been in this state
+    unsigned long mslpc = microsSinceLastPowerChange(POWERMODE::ALERT);
+    if(checkFault()) {
+      throttleInrush(true);
+      lastBadSample = now;
+      unsigned long timeout = checkCurrent(useProgLimit) ? POWER_SAMPLE_IGNORE_FAULT_HIGH : POWER_SAMPLE_IGNORE_FAULT_LOW;
+      if ( mslpc < timeout) {
+	if (powerModeChange)
+	  DIAG(F("TRACK %c FAULT PIN (%M ignore)"), trackno + 'A', timeout);
+	break;
+      }
+      DIAG(F("TRACK %c FAULT PIN detected after %4M. Pause %4M)"), trackno + 'A', mslpc, power_sample_overload_wait);
+      throttleInrush(false);
+      setPower(POWERMODE::OVERLOAD);
+      break;
+    }
+    if (checkCurrent(useProgLimit)) {
+      lastBadSample = now;
+      if (mslpc < POWER_SAMPLE_IGNORE_CURRENT) {
+	if (powerModeChange) {
+	  unsigned int mA=raw2mA(lastCurrent);
+	  DIAG(F("TRACK %c CURRENT (%M ignore) %dmA"), trackno + 'A', POWER_SAMPLE_IGNORE_CURRENT, mA);
+	}
+	break;
+      }
+      unsigned int mA=raw2mA(lastCurrent);
+      unsigned int maxmA=raw2mA(tripValue);
+      DIAG(F("TRACK %c POWER OVERLOAD %4dmA (max %4dmA) detected after %4M. Pause %4M"),
+	   trackno + 'A', mA, maxmA, mslpc, power_sample_overload_wait);
+      throttleInrush(false);
+      setPower(POWERMODE::OVERLOAD);
+      break;
+    }
+    // all well
+    unsigned long goodtime = micros() - lastBadSample;
+    if (goodtime > POWER_SAMPLE_ALERT_GOOD) {
+      if (true || notFromOverload) { // we did a RESTORE message XXX
+	unsigned int mA=raw2mA(lastCurrent);
+	DIAG(F("TRACK %c NORMAL (after %M/%M) %dmA"), trackno + 'A', goodtime, mslpc, mA);
+      }
+      throttleInrush(false);
+      setPower(POWERMODE::ON);
+    }
+    break;
+  }
+
+  case POWERMODE::OVERLOAD: {
+    lastPowerMode = POWERMODE::OVERLOAD;
+    unsigned long mslpc = (commonFaultPin ? (micros() - globalOverloadStart) : microsSinceLastPowerChange(POWERMODE::OVERLOAD));
     if (mslpc > power_sample_overload_wait) {
       // adjust next wait time
       power_sample_overload_wait *= 2;
       if (power_sample_overload_wait > POWER_SAMPLE_RETRY_MAX)
 	power_sample_overload_wait = POWER_SAMPLE_RETRY_MAX;
       // power on test
-      setPower(POWERMODE::ON);
-      // here we change power but not the overloadNow as that was
-      // already changed to false when we entered POWERMODE::OVERLOAD
-      // so we need to set the lastPowerChange anyway.
-      overloadNow=false;
-      setLastPowerChange();
       DIAG(F("TRACK %c POWER RESTORE (after %4M)"), trackno + 'A', mslpc);
+      setPower(POWERMODE::ALERT);
     }
+    break;
   }
-  break;
+
   default:
     break;
   }

MotorDriver.h

@@ -27,6 +27,10 @@
 #include "IODevice.h"
 #include "DCCTimer.h"
 
+// use powers of two so we can do logical and/or on the track modes in if clauses.
+enum TRACK_MODE : byte {TRACK_MODE_OFF = 1, TRACK_MODE_MAIN = 2, TRACK_MODE_PROG = 4,
+                        TRACK_MODE_DC = 8, TRACK_MODE_DCX = 16, TRACK_MODE_EXT = 32};
+
 #define setHIGH(fastpin)  *fastpin.inout |= fastpin.maskHIGH
 #define setLOW(fastpin)   *fastpin.inout &= fastpin.maskLOW
 #define isHIGH(fastpin)   (*fastpin.inout & fastpin.maskHIGH)
@@ -107,7 +111,7 @@ extern volatile portreg_t shadowPORTA;
 extern volatile portreg_t shadowPORTB;
 extern volatile portreg_t shadowPORTC;
 
-enum class POWERMODE : byte { OFF, ON, OVERLOAD };
+enum class POWERMODE : byte { OFF, ON, OVERLOAD, ALERT };
 
 class MotorDriver {
   public:
@@ -145,6 +149,7 @@ class MotorDriver {
     };
     inline pinpair getSignalPin() { return pinpair(signalPin,signalPin2); };
     void setDCSignal(byte speedByte);
+    void throttleInrush(bool on);
     inline void detachDCSignal() {
 #if defined(__arm__)
       pinMode(brakePin, OUTPUT);
@@ -192,35 +197,43 @@ class MotorDriver {
     // this returns how much time has passed since the last power change. If it
     // was really long ago (approx > 52min) advance counter approx 35 min so that
     // we are at 18 minutes again. Times for 32 bit unsigned long.
-    inline unsigned long microsSinceLastPowerChange() {
+    inline unsigned long microsSinceLastPowerChange(POWERMODE mode) {
       unsigned long now = micros();
-      unsigned long diff = now - lastPowerChange;
+      unsigned long diff = now - lastPowerChange[(int)mode];
       if (diff > (1UL << (7 *sizeof(unsigned long)))) // 2^(4*7)us = 268.4 seconds
-        lastPowerChange = now - 30000000UL;           // 30 seconds ago
+        lastPowerChange[(int)mode] = now - 30000000UL;           // 30 seconds ago
       return diff;
     };
-    inline void setLastPowerChange() {
-      lastPowerChange = micros();
-    };
-    // as setLastPowerChange but sets the global timestamp as well which
-    // is only used to sync power restore in case of common Fault pin.
-    inline void setLastPowerChangeOverload() {
-      if (commonFaultPin)
-	globalOverloadStart = lastPowerChange = micros();
-      else
-	setLastPowerChange();
-    };
 #ifdef ANALOG_READ_INTERRUPT
     bool sampleCurrentFromHW();
     void startCurrentFromHW();
 #endif
+  inline void setMode(TRACK_MODE m) {
+    trackMode = m;
+  };
+  inline TRACK_MODE getMode() {
+    return trackMode;
+  };
   private:
     char trackLetter = '?';
     bool isProgTrack = false; // tells us if this is a prog track
     void  getFastPin(const FSH* type,int pin, bool input, FASTPIN & result);
-    void  getFastPin(const FSH* type,int pin, FASTPIN & result) {
+    inline void  getFastPin(const FSH* type,int pin, FASTPIN & result) {
 	getFastPin(type, pin, 0, result);
-    }
+    };
+    // side effect sets lastCurrent and tripValue
+    inline bool checkCurrent(bool useProgLimit) {
+      tripValue= useProgLimit?progTripValue:getRawCurrentTripValue();
+      lastCurrent = getCurrentRaw();
+      if (lastCurrent < 0)
+	lastCurrent = -lastCurrent;
+      return lastCurrent >= tripValue;
+    };
+    // side effect sets lastCurrent
+    inline bool checkFault() {
+      lastCurrent = getCurrentRaw();
+      return lastCurrent < 0;
+    };
     VPIN powerPin;
     byte signalPin, signalPin2, currentPin, faultPin, brakePin;
     FASTPIN fastSignalPin, fastSignalPin2, fastBrakePin,fastFaultPin;
@@ -241,12 +254,14 @@ class MotorDriver {
     int rawCurrentTripValue;
     // current sampling
     POWERMODE powerMode;
-    bool overloadNow = false;
-    unsigned long lastPowerChange;            // timestamp in microseconds
+    POWERMODE lastPowerMode;
+    unsigned long lastPowerChange[4];         // timestamp in microseconds
+    unsigned long lastBadSample;              // timestamp in microseconds
     // used to sync restore time when common Fault pin detected
     static unsigned long globalOverloadStart; // timestamp in microseconds
     int progTripValue;
-    int  lastCurrent;
+    int  lastCurrent; //temp value
+    int  tripValue;   //temp value
 #ifdef ANALOG_READ_INTERRUPT
     volatile unsigned long sampleCurrentTimestamp;
     volatile uint16_t sampleCurrent;
@@ -256,15 +271,17 @@ class MotorDriver {
 
     // Times for overload management. Unit: microseconds.
     // Base for wait time until power is turned on again
-    static const unsigned long POWER_SAMPLE_OVERLOAD_WAIT =       100UL;
+    static const unsigned long POWER_SAMPLE_OVERLOAD_WAIT =     40000UL;
     // Time after we consider all faults old and forgotten
     static const unsigned long POWER_SAMPLE_ALL_GOOD =        5000000UL;
+    // Time after which we consider a ALERT over 
+    static const unsigned long POWER_SAMPLE_ALERT_GOOD =        20000UL;
     // How long to ignore fault pin if current is under limit
-    static const unsigned long POWER_SAMPLE_IGNORE_FAULT_LOW =  50000UL;
+    static const unsigned long POWER_SAMPLE_IGNORE_FAULT_LOW = 100000UL;
     // How long to ignore fault pin if current is higher than limit
     static const unsigned long POWER_SAMPLE_IGNORE_FAULT_HIGH =  5000UL;
     // How long to wait between overcurrent and turning off
-    static const unsigned long POWER_SAMPLE_OFF_DELAY =         10000UL;
+    static const unsigned long POWER_SAMPLE_IGNORE_CURRENT  =  100000UL;
     // Upper limit for retry period
     static const unsigned long POWER_SAMPLE_RETRY_MAX =      10000000UL;
     
@@ -273,6 +290,7 @@ class MotorDriver {
     static const int TRIP_CURRENT_PROG=250;
     unsigned long power_sample_overload_wait = POWER_SAMPLE_OVERLOAD_WAIT;
     unsigned int power_good_counter = 0;
+    TRACK_MODE trackMode = TRACK_MODE_OFF; // we assume off at startup
 
 };
 #endif

TrackManager.cpp

@@ -31,7 +31,7 @@
     
 #define APPLY_BY_MODE(findmode,function) \
         FOR_EACH_TRACK(t) \
-            if (trackMode[t]==findmode) \
+	    if (track[t]->getMode()==findmode)	\
                 track[t]->function;
 #ifndef DISABLE_PROG
 const int16_t HASH_KEYWORD_PROG = -29718;
@@ -44,7 +44,6 @@ const int16_t HASH_KEYWORD_EXT = 8201; // External DCC signal
 const int16_t HASH_KEYWORD_A = 65; // parser makes single chars the ascii.   
 
 MotorDriver * TrackManager::track[MAX_TRACKS];
-TRACK_MODE TrackManager::trackMode[MAX_TRACKS];
 int16_t TrackManager::trackDCAddr[MAX_TRACKS];
 
 POWERMODE TrackManager::mainPowerGuess=POWERMODE::OFF;
@@ -74,7 +73,7 @@ void TrackManager::sampleCurrent() {
     waiting = false;
     tr++;
     if (tr > lastTrack) tr = 0;
-    if (lastTrack < 2 || trackMode[tr] & TRACK_MODE_PROG) {
+    if (lastTrack < 2 || track[tr]->getMode() & TRACK_MODE_PROG) {
       return; // We could continue but for prog track we
               // rather do it in next interrupt beacuse
               // that gives us well defined sampling point.
@@ -85,7 +84,7 @@ void TrackManager::sampleCurrent() {
   if (!waiting) {
     // look for a valid track to sample or until we are around
     while (true) {
-      if (trackMode[tr] & ( TRACK_MODE_MAIN|TRACK_MODE_PROG|TRACK_MODE_DC|TRACK_MODE_DCX|TRACK_MODE_EXT )) {
+      if (track[tr]->getMode() & ( TRACK_MODE_MAIN|TRACK_MODE_PROG|TRACK_MODE_DC|TRACK_MODE_DCX|TRACK_MODE_EXT )) {
 	track[tr]->startCurrentFromHW();
 	// for scope debug track[1]->setBrake(1);
 	waiting = true;
@@ -138,10 +137,10 @@ void TrackManager::Setup(const FSH * shieldname,
 }
 
 void TrackManager::addTrack(byte t, MotorDriver* driver) {
-     trackMode[t]=TRACK_MODE_OFF;
      track[t]=driver;
      if (driver) {
          track[t]->setPower(POWERMODE::OFF);
+         track[t]->setMode(TRACK_MODE_OFF);
 	 track[t]->setTrackLetter('A'+t);
          lastTrack=t;
      } 
@@ -183,15 +182,15 @@ void TrackManager::setPROGSignal( bool on) {
 void TrackManager::setDCSignal(int16_t cab, byte speedbyte) {
   FOR_EACH_TRACK(t) {
     if (trackDCAddr[t]!=cab) continue;
-    if (trackMode[t]==TRACK_MODE_DC) track[t]->setDCSignal(speedbyte);
-    else if (trackMode[t]==TRACK_MODE_DCX) track[t]->setDCSignal(speedbyte ^ 128);
+    if (track[t]->getMode()==TRACK_MODE_DC) track[t]->setDCSignal(speedbyte);
+    else if (track[t]->getMode()==TRACK_MODE_DCX) track[t]->setDCSignal(speedbyte ^ 128);
   }
 }    
 
 bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr) {
     if (trackToSet>lastTrack || track[trackToSet]==NULL) return false;
 
-    //DIAG(F("Track=%c"),trackToSet+'A');
+    //DIAG(F("Track=%c Mode=%d"),trackToSet+'A', mode);
     // DC tracks require a motorDriver that can set brake!
     if ((mode==TRACK_MODE_DC || mode==TRACK_MODE_DCX)
          && !track[trackToSet]->brakeCanPWM()) {
@@ -218,9 +217,9 @@ bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr
 #endif
       // only allow 1 track to be prog
       FOR_EACH_TRACK(t)
-	if (trackMode[t]==TRACK_MODE_PROG && t != trackToSet) {
+	if (track[t]->getMode()==TRACK_MODE_PROG && t != trackToSet) {
 	  track[t]->setPower(POWERMODE::OFF);
-	  trackMode[t]=TRACK_MODE_OFF;
+	  track[t]->setMode(TRACK_MODE_OFF);
 	  track[t]->makeProgTrack(false);     // revoke prog track special handling
     streamTrackState(NULL,t);
 	}
@@ -228,7 +227,7 @@ bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr
     } else {
       track[trackToSet]->makeProgTrack(false); // only the prog track knows it's type
     }
-    trackMode[trackToSet]=mode;
+    track[trackToSet]->setMode(mode);
     trackDCAddr[trackToSet]=dcAddr;
     streamTrackState(NULL,trackToSet);
 
@@ -255,7 +254,7 @@ bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr
       // DC tracks must not have the DCC PWM switched on
       // so we globally turn it off if one of the PWM
       // capable tracks is now DC or DCX.
-      if (trackMode[t]==TRACK_MODE_DC || trackMode[t]==TRACK_MODE_DCX) {
+      if (track[t]->getMode()==TRACK_MODE_DC || track[t]->getMode()==TRACK_MODE_DCX) {
 	if (track[t]->isPWMCapable()) {
 	  canDo=false;    // this track is capable but can not run PWM
 	  break;          // in this mode, so abort and prevent globally below
@@ -263,7 +262,7 @@ bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr
 	  track[t]->trackPWM=false; // this track sure can not run with PWM
 	  //DIAG(F("Track %c trackPWM 0 (not capable)"), t+'A');
 	}
-      } else if (trackMode[t]==TRACK_MODE_MAIN || trackMode[t]==TRACK_MODE_PROG) {
+      } else if (track[t]->getMode()==TRACK_MODE_MAIN || track[t]->getMode()==TRACK_MODE_PROG) {
 	track[t]->trackPWM = track[t]->isPWMCapable(); // trackPWM is still a guess here
 	//DIAG(F("Track %c trackPWM %d"), t+'A', track[t]->trackPWM);
 	canDo &= track[t]->trackPWM;
@@ -301,7 +300,7 @@ bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr
 
 void TrackManager::applyDCSpeed(byte t) {
   uint8_t speedByte=DCC::getThrottleSpeedByte(trackDCAddr[t]);
-  if (trackMode[t]==TRACK_MODE_DCX)
+  if (track[t]->getMode()==TRACK_MODE_DCX)
     speedByte = speedByte ^ 128; // reverse direction bit
   track[t]->setDCSignal(speedByte);
 }
@@ -347,7 +346,7 @@ void TrackManager::streamTrackState(Print* stream, byte t) {
   // null stream means send to commandDistributor for broadcast
   if (track[t]==NULL) return;
   auto format=F("");
-  switch(trackMode[t]) {
+  switch(track[t]->getMode()) {
   case TRACK_MODE_MAIN:
       format=F("<= %c MAIN>\n");
       break;
@@ -387,13 +386,13 @@ void TrackManager::loop() {
     if (nextCycleTrack>lastTrack) nextCycleTrack=0;
     if (track[nextCycleTrack]==NULL) return;
     MotorDriver * motorDriver=track[nextCycleTrack];
-    bool useProgLimit=dontLimitProg? false: trackMode[nextCycleTrack]==TRACK_MODE_PROG;
+    bool useProgLimit=dontLimitProg? false: track[nextCycleTrack]->getMode()==TRACK_MODE_PROG;
     motorDriver->checkPowerOverload(useProgLimit, nextCycleTrack);   
 }
 
 MotorDriver * TrackManager::getProgDriver() {
     FOR_EACH_TRACK(t)
-        if (trackMode[t]==TRACK_MODE_PROG) return track[t];
+      if (track[t]->getMode()==TRACK_MODE_PROG) return track[t];
     return NULL;
 } 
 
@@ -401,7 +400,7 @@ MotorDriver * TrackManager::getProgDriver() {
 std::vector<MotorDriver *>TrackManager::getMainDrivers() {
   std::vector<MotorDriver *>  v;
   FOR_EACH_TRACK(t)
-    if (trackMode[t]==TRACK_MODE_MAIN) v.push_back(track[t]);
+    if (track[t]->getMode()==TRACK_MODE_MAIN) v.push_back(track[t]);
   return v;
 }
 #endif
@@ -411,7 +410,7 @@ void TrackManager::setPower2(bool setProg,POWERMODE mode) {
     FOR_EACH_TRACK(t) {
         MotorDriver * driver=track[t]; 
         if (!driver) continue; 
-        switch (trackMode[t]) {
+        switch (track[t]->getMode()) {
             case TRACK_MODE_MAIN:
                 if (setProg) break; 
                 // toggle brake before turning power on - resets overcurrent error
@@ -447,8 +446,8 @@ void TrackManager::setPower2(bool setProg,POWERMODE mode) {
   
 POWERMODE TrackManager::getProgPower() {
     FOR_EACH_TRACK(t)
-        if (trackMode[t]==TRACK_MODE_PROG) 
-                return track[t]->getPower();
+      if (track[t]->getMode()==TRACK_MODE_PROG) 
+	return track[t]->getPower();
     return POWERMODE::OFF;   
   }
 
@@ -492,7 +491,7 @@ void TrackManager::setJoin(bool joined) {
 #ifdef ARDUINO_ARCH_ESP32
   if (joined) {
     FOR_EACH_TRACK(t) {
-      if (trackMode[t]==TRACK_MODE_PROG) {
+      if (track[t]->getMode()==TRACK_MODE_PROG) {
 	tempProgTrack = t;
 	setTrackMode(t, TRACK_MODE_MAIN);
 	break;

TrackManager.h

@@ -27,10 +27,6 @@
 #include "MotorDriver.h"
 // Virtualised Motor shield multi-track hardware Interface
 
-// use powers of two so we can do logical and/or on the track modes in if clauses.
-enum TRACK_MODE : byte {TRACK_MODE_OFF = 1, TRACK_MODE_MAIN = 2, TRACK_MODE_PROG = 4,
-                        TRACK_MODE_DC = 8, TRACK_MODE_DCX = 16, TRACK_MODE_EXT = 32};
-
 // These constants help EXRAIL macros say SET_TRACK(2,mode) OR SET_TRACK(C,mode) etc.
 const byte TRACK_NUMBER_0=0, TRACK_NUMBER_A=0;    
 const byte TRACK_NUMBER_1=1, TRACK_NUMBER_B=1;    
@@ -100,7 +96,6 @@ class TrackManager {
     static POWERMODE mainPowerGuess;
     static void applyDCSpeed(byte t);
 
-    static TRACK_MODE trackMode[MAX_TRACKS]; 
     static int16_t trackDCAddr[MAX_TRACKS];  // dc address if TRACK_MODE_DC or TRACK_MODE_DCX
 #ifdef ARDUINO_ARCH_ESP32
     static byte tempProgTrack; // holds the prog track number during join

WifiESP32.cpp

@@ -1,5 +1,7 @@
 /*
-    © 2021, Harald Barth.
+    © 2023 Paul M. Antoine
+    © 2021 Harald Barth
+    © 2023 Nathan Kellenicki
 
     This file is part of CommandStation-EX
 
@@ -20,6 +22,7 @@
 #if defined(ARDUINO_ARCH_ESP32)
 #include <vector>
 #include "defines.h"
+#include "ESPmDNS.h"
 #include <WiFi.h>
 #include "esp_wifi.h"
 #include "WifiESP32.h"
@@ -105,11 +108,18 @@ void wifiLoop(void *){
 }
 #endif
 
+char asciitolower(char in) {
+  if (in <= 'Z' && in >= 'A')
+    return in - ('Z' - 'z');
+  return in;
+}
+
 bool WifiESP::setup(const char *SSid,
                     const char *password,
                     const char *hostname,
                     int port,
-                    const byte channel) {
+                    const byte channel,
+                    const bool forceAP) {
   bool havePassword = true;
   bool haveSSID = true;
   bool wifiUp = false;
@@ -137,7 +147,8 @@ bool WifiESP::setup(const char *SSid,
   if (strncmp(yourNetwork, password, 13) == 0 || strncmp("", password, 13) == 0)
     havePassword = false;
 
-  if (haveSSID && havePassword) {
+  if (haveSSID && havePassword && !forceAP) {
+    WiFi.setHostname(hostname); // Strangely does not work unless we do it HERE!
     WiFi.mode(WIFI_STA);
 #ifdef SERIAL_BT_COMMANDS
     WiFi.setSleep(true);
@@ -174,16 +185,20 @@ bool WifiESP::setup(const char *SSid,
       }
     }
   }
-  if (!haveSSID) {
+  if (!haveSSID || forceAP) {
     // prepare all strings
-    String strSSID("DCCEX_");
-    String strPass("PASS_");
-    String strMac = WiFi.macAddress();
-    strMac.remove(0,9);
-    strMac.replace(":","");
-    strMac.replace(":","");
-    strSSID.concat(strMac);
-    strPass.concat(strMac);
+    String strSSID(forceAP ? SSid : "DCCEX_");
+    String strPass(forceAP ? password : "PASS_");
+    if (!forceAP) {
+      String strMac = WiFi.macAddress();
+      strMac.remove(0,9);
+      strMac.replace(":","");
+      strMac.replace(":","");
+      // convert mac addr hex chars to lower case to be compatible with AT software
+      std::transform(strMac.begin(), strMac.end(), strMac.begin(), asciitolower);
+      strSSID.concat(strMac);
+      strPass.concat(strMac);
+    }
 
     WiFi.mode(WIFI_AP);
 #ifdef SERIAL_BT_COMMANDS
@@ -209,6 +224,15 @@ bool WifiESP::setup(const char *SSid,
     // no idea to go on
     return false;
   }
+
+  // Now Wifi is up, register the mDNS service
+  if(!MDNS.begin(hostname)) {
+    DIAG(F("Wifi setup failed to start mDNS"));
+  }
+  if(!MDNS.addService("withrottle", "tcp", 2560)) {
+    DIAG(F("Wifi setup failed to add withrottle service to mDNS"));
+  }
+
   server = new WiFiServer(port); // start listening on tcp port
   server->begin();
   // server started here

WifiESP32.h

@@ -1,5 +1,6 @@
 /*
- *  © 2021, Harald Barth.
+ *  © 2021 Harald Barth
+ *  © 2023 Nathan Kellenicki
  *
  *  This file is part of CommandStation-EX
  *
@@ -31,7 +32,8 @@ public:
 		    const char *wifiPassword,
 		    const char *hostname,
 		    const int port,
-		    const byte channel);
+		    const byte channel,
+			const bool forceAP);
   static void loop();
 private:
 };

WifiInterface.cpp

@@ -2,6 +2,7 @@
  *  © 2021 Fred Decker
  *  © 2020-2022 Harald Barth
  *  © 2020-2022 Chris Harlow
+ *  © 2023 Nathan Kellenicki
  *  All rights reserved.
  *
  *  This file is part of CommandStation-EX
@@ -83,7 +84,8 @@ bool WifiInterface::setup(long serial_link_speed,
                           const FSH *wifiPassword,
                           const FSH *hostname,
                           const int port,
-                          const byte channel) {
+                          const byte channel,
+                          const bool forceAP) {
 
   wifiSerialState wifiUp = WIFI_NOAT;
 
@@ -95,12 +97,13 @@ bool WifiInterface::setup(long serial_link_speed,
   (void) hostname;
   (void) port;
   (void) channel;
+  (void) forceAP;
 #endif  
 
 // See if the WiFi is attached to the first serial port
 #if NUM_SERIAL > 0 && !defined(SERIAL1_COMMANDS)
   SERIAL1.begin(serial_link_speed);
-  wifiUp = setup(SERIAL1, wifiESSID, wifiPassword, hostname, port, channel);
+  wifiUp = setup(SERIAL1, wifiESSID, wifiPassword, hostname, port, channel, forceAP);
 #endif
 
 // Other serials are tried, depending on hardware.
@@ -110,7 +113,7 @@ bool WifiInterface::setup(long serial_link_speed,
   if (wifiUp == WIFI_NOAT)
   {
     Serial2.begin(serial_link_speed);
-    wifiUp = setup(Serial2, wifiESSID, wifiPassword, hostname, port, channel);
+    wifiUp = setup(Serial2, wifiESSID, wifiPassword, hostname, port, channel, forceAP);
   }
 #endif
 #endif
@@ -121,7 +124,7 @@ bool WifiInterface::setup(long serial_link_speed,
   if (wifiUp == WIFI_NOAT)
   {
     SERIAL3.begin(serial_link_speed);
-    wifiUp = setup(SERIAL3, wifiESSID, wifiPassword, hostname, port, channel);
+    wifiUp = setup(SERIAL3, wifiESSID, wifiPassword, hostname, port, channel, forceAP);
   }
 #endif
 
@@ -139,7 +142,7 @@ bool WifiInterface::setup(long serial_link_speed,
 }
 
 wifiSerialState WifiInterface::setup(Stream & setupStream,  const FSH* SSid, const FSH* password,
-				     const FSH* hostname,  int port, byte channel) {
+				     const FSH* hostname,  int port, byte channel, bool forceAP) {
   wifiSerialState wifiState;
   static uint8_t ntry = 0;
   ntry++;
@@ -148,7 +151,7 @@ wifiSerialState WifiInterface::setup(Stream & setupStream,  const FSH* SSid, con
 
   DIAG(F("++ Wifi Setup Try %d ++"), ntry);
 
-  wifiState = setup2( SSid, password, hostname,  port, channel);
+  wifiState = setup2( SSid, password, hostname,  port, channel, forceAP);
 
   if (wifiState == WIFI_NOAT) {
     LCD(4, F("WiFi no AT chip"));
@@ -172,7 +175,7 @@ wifiSerialState WifiInterface::setup(Stream & setupStream,  const FSH* SSid, con
 #pragma GCC diagnostic ignored "-Wunused-parameter"
 #endif
 wifiSerialState WifiInterface::setup2(const FSH* SSid, const FSH* password,
-				      const FSH* hostname, int port, byte channel) {
+				      const FSH* hostname, int port, byte channel, bool forceAP) {
   bool ipOK = false;
   bool oldCmd = false;
 
@@ -225,7 +228,7 @@ wifiSerialState WifiInterface::setup2(const FSH* SSid, const FSH* password,
 	  if (!checkForOK(1000, F("0.0.0.0"), true,false))
 	      ipOK = true;
     }
-  } else {
+  } else if (!forceAP) {
       // SSID was configured, so we assume station (client) mode.
       if (oldCmd) {
 	      // AT command early version supports CWJAP/CWSAP
@@ -285,14 +288,19 @@ wifiSerialState WifiInterface::setup2(const FSH* SSid, const FSH* password,
   
     i=0;
     do {
-      if (STRNCMP_P(yourNetwork, (const char*)password, 13) == 0) {
-	// unconfigured
-        StringFormatter::send(wifiStream, F("AT+CWSAP%s=\"DCCEX_%s\",\"PASS_%s\",%d,4\r\n"),
-                                          oldCmd ? "" : "_CUR", macTail, macTail, channel);
+      if (!forceAP) {
+        if (STRNCMP_P(yourNetwork, (const char*)password, 13) == 0) {
+    // unconfigured
+          StringFormatter::send(wifiStream, F("AT+CWSAP%s=\"DCCEX_%s\",\"PASS_%s\",%d,4\r\n"),
+                                            oldCmd ? "" : "_CUR", macTail, macTail, channel);
+        } else {
+          // password configured by user
+          StringFormatter::send(wifiStream, F("AT+CWSAP%s=\"DCCEX_%s\",\"%S\",%d,4\r\n"), oldCmd ? "" : "_CUR",
+                                          macTail, password, channel);
+        }
       } else {
-        // password configured by user
-       StringFormatter::send(wifiStream, F("AT+CWSAP%s=\"DCCEX_%s\",\"%S\",%d,4\r\n"), oldCmd ? "" : "_CUR",
-	                                       macTail, password, channel);
+        StringFormatter::send(wifiStream, F("AT+CWSAP%s=\"%S\",\"%S\",%d,4\r\n"),
+                                        oldCmd ? "" : "_CUR", SSid, password, channel);
       }
     } while (!checkForOK(WIFI_CONNECT_TIMEOUT, true) && i++<2); // do twice if necessary but ignore failure as AP mode may still be ok
     if (i >= 2)

WifiInterface.h

@@ -1,6 +1,7 @@
 /*
  *  © 2020-2021 Chris Harlow
  *  © 2020, Harald Barth.
+ *  © 2023 Nathan Kellenicki
  *  All rights reserved.
  *
  *  This file is part of CommandStation-EX
@@ -36,17 +37,18 @@ public:
                           const FSH *wifiPassword,
                           const FSH *hostname,
                           const int port,
-                          const byte channel);
+                          const byte channel,
+                          const bool forceAP);
   static void loop();
   static void ATCommand(HardwareSerial * stream,const byte *command);
   
 private:
   static wifiSerialState setup(Stream &setupStream, const FSH *SSSid, const FSH *password,
-                    const FSH *hostname, int port, byte channel);
+                    const FSH *hostname, int port, byte channel, bool forceAP);
   static Stream *wifiStream;
   static DCCEXParser parser;
   static wifiSerialState setup2(const FSH *SSSid, const FSH *password,
-                     const FSH *hostname, int port, byte channel);
+                     const FSH *hostname, int port, byte channel, bool forceAP);
   static bool checkForOK(const unsigned int timeout, bool echo, bool escapeEcho = true);
   static bool checkForOK(const unsigned int timeout, const FSH *waitfor, bool echo, bool escapeEcho = true);
   static bool connected;

config.example.h

@@ -4,6 +4,7 @@
  *  © 2020-2023 Harald Barth
  *  © 2020-2021 Fred Decker
  *  © 2020-2021 Chris Harlow
+ *  © 2023 Nathan Kellenicki
  *  
  *  This file is part of CommandStation-EX
  *
@@ -57,6 +58,21 @@ The configuration file for DCC-EX Command Station
 //   +-----------------------v
 //
 #define MOTOR_SHIELD_TYPE STANDARD_MOTOR_SHIELD
+//
+/////////////////////////////////////////////////////////////////////////////////////
+//
+// If you want to restrict the maximum current LOWER than what your
+// motor shield can provide, you can do that here. For example if you
+// have a motor shield that can provide 5A and your power supply can
+// only provide 2.5A then you should restict the maximum current to
+// 2.25A (90% of 2.5A) so that DCC-EX does shut off the track before
+// your PS does shut DCC-EX. MAX_CURRENT is in mA so for this example
+// it would be 2250, adjust the number according to your PS. If your
+// PS has a higher rating than your motor shield you do not need this.
+// You can use this as well if you are cautious and your trains do not
+// need full current.
+// #define MAX_CURRENT 2250
+//
 /////////////////////////////////////////////////////////////////////////////////////
 //
 // The IP port to talk to a WIFI or Ethernet shield.
@@ -108,6 +124,11 @@ The configuration file for DCC-EX Command Station
 // this line exists or not. If you need to use an alternate channel (we recommend
 // using only 1,6, or 11) you may change it here.
 #define WIFI_CHANNEL 1
+//
+// WIFI_FORCE_AP: If you'd like to specify your own WIFI_SSID in AP mode, set this
+// true. Otherwise it is assumed that you'd like to connect to an existing network
+// with that SSID.
+#define WIFI_FORCE_AP false
 
 /////////////////////////////////////////////////////////////////////////////////////
 //

defines.h

@@ -182,6 +182,15 @@
   #define WIFI_ON false
 #endif
 
+#ifndef WIFI_FORCE_AP
+  #define WIFI_FORCE_AP false
+#else
+  #if WIFI_FORCE_AP==true || WIFI_FORCE_AP==false
+  #else
+    #error WIFI_FORCE_AP needs to be true or false
+  #endif
+#endif
+
 #if ENABLE_ETHERNET
   #if defined(HAS_ENOUGH_MEMORY)
     #define ETHERNET_ON true
@@ -205,7 +214,7 @@
 #define WIFI_SERIAL_LINK_SPEED 115200
 
 #if __has_include ( "myAutomation.h")
-  #if defined(HAS_ENOUGH_MEMORY) || defined(DISABLE_EEPROM)
+  #if defined(HAS_ENOUGH_MEMORY) || defined(DISABLE_EEPROM) || defined(DISABLE_PROG)
     #define EXRAIL_ACTIVE
   #else
     #define EXRAIL_WARNING

installer.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 #
-# © 2022 Harald Barth
+# © 2022,2023 Harald Barth
 # 
 # This file is part of CommandStation-EX
 #
@@ -29,14 +29,33 @@ ACLI="./bin/arduino-cli"
 
 function need () {
     type -p $1 > /dev/null && return
+    dpkg -l $1 2>&1 | egrep ^ii >/dev/null && return
     sudo apt-get install $1
     type -p $1 > /dev/null && return
     echo "Could not install $1, abort"
     exit 255
 }
 
-
 need git
+
+if cat /etc/issue | egrep '^Raspbian' 2>&1 >/dev/null ; then
+    # we are on a raspi where we do not support graphical
+    unset DISPLAY
+fi
+
+if [ x$DISPLAY != x ] ; then
+    # we have DISPLAY, do the graphic thing
+    need python3-tk
+    need python3.8-venv
+    mkdir -p ~/ex-installer/venv
+    python3 -m venv ~/ex-installer/venv
+    cd ~/ex-installer/venv || exit 255
+    source ./bin/activate
+    git clone https://github.com/DCC-EX/EX-Installer
+    cd EX-Installer || exit 255
+    pip3 install -r requirements.txt
+    exec python3 -m ex_installer
+fi
 if test -d `basename "$DCCEXGITURL"` ; then
     : assume we are almost there
     cd `basename "$DCCEXGITURL"` || exit 255

platformio.ini

@@ -173,6 +173,8 @@ board = esp32dev
 framework = arduino
 lib_deps = ${env.lib_deps}
 build_flags = -std=c++17
+monitor_speed = 115200
+monitor_echo = yes
 
 [env:Nucleo-F411RE]
 platform = ststm32

version.h

@@ -3,8 +3,17 @@
 
 #include "StringFormatter.h"
 
-
-#define VERSION "4.2.59"
+#define VERSION "4.2.66"
+// 4.2.66 - Throttle inrush current by applying PWM to brake pin when
+//          fault pin goes active
+// 4.2.65 - new config WIFI_FORCE_AP option
+// 4.2.63 - completely new overcurrent detection
+//        - ESP32 protect from race in RMT code
+// 4.2.62 - Update IO_RotaryEncoder.h to ignore sending current position
+//        - Update IO_EXTurntable.h to remove forced I2C clock speed
+//        - Show device offline if EX-Turntable not connected
+// 4.2.61 - MAX_CURRENT restriction (caps motor shield value)
+// 4.2.60 - Add mDNS capability to ESP32 for autodiscovery
 // 4.2.59 - Fix: AP SSID was DCC_ instead of DCCEX_
 // 4.2.58 - Start motordriver as soon as possible but without waveform
 // 4.2.57 - New overload handling (faster and handles commonFaultPin again)