version 5.2.62

commit a2b3ee8b5d52c2eefa461ace8f95c7f782a58efc
Merge: fc1217b 3d6c935
Author: Asbelos <asbelos@btinternet.com>
Date:   Thu Jun 13 11:58:00 2024 +0100

    Merge branch 'devel' into devel_merg

commit fc1217b8fa27a83174a4cf3bb82666f075103637
Author: Asbelos <asbelos@btinternet.com>
Date:   Thu Jun 13 11:57:12 2024 +0100

    Update EXRAIL2Parser.cpp

commit b89508671c
Author: Asbelos <asbelos@btinternet.com>
Date:   Wed Jun 12 16:25:17 2024 +0100

    Separate <L> polling cycle

commit 9f1257bc6c
Merge: a2fb585 5f65fd5
Author: Asbelos <asbelos@btinternet.com>
Date:   Wed Jun 12 10:57:09 2024 +0100

    Merge branch 'devel' into devel_merg

commit a2fb58584f
Author: Asbelos <asbelos@btinternet.com>
Date:   Fri May 31 19:49:39 2024 +0100

    ACON/ACOF 32 bit + 1=OFF

commit fca4ea052e
Author: Asbelos <asbelos@btinternet.com>
Date:   Fri May 31 12:09:38 2024 +0100

    Rename to ACON/ACOF terminology

commit 0d07aa6271
Author: Asbelos <asbelos@btinternet.com>
Date:   Thu May 30 19:59:29 2024 +0100

    MERG macris in exrail

DCCACK.cpp

@@ -27,8 +27,8 @@
 #include "DCCWaveform.h"
 #include "TrackManager.h"
 
-unsigned int DCCACK::minAckPulseDuration = 2000; // micros
-unsigned int DCCACK::maxAckPulseDuration = 20000; // micros
+unsigned long DCCACK::minAckPulseDuration = 2000; // micros
+unsigned long DCCACK::maxAckPulseDuration = 20000; // micros
   
 MotorDriver *  DCCACK::progDriver=NULL;
 ackOp  const *  DCCACK::ackManagerProg;
@@ -50,8 +50,8 @@ volatile uint8_t DCCACK::numAckSamples=0;
 uint8_t DCCACK::trailingEdgeCounter=0;
 
 
- unsigned int DCCACK::ackPulseDuration;  // micros
- unsigned long DCCACK::ackPulseStart; // micros
+unsigned long DCCACK::ackPulseDuration;  // micros
+unsigned long DCCACK::ackPulseStart; // micros
  volatile bool DCCACK::ackDetected;
  unsigned long DCCACK::ackCheckStart; // millis
  volatile bool DCCACK::ackPending;
@@ -127,7 +127,7 @@ bool DCCACK::checkResets(uint8_t numResets) {
 void DCCACK::setAckBaseline() {
       int baseline=progDriver->getCurrentRaw();
       ackThreshold= baseline + progDriver->mA2raw(ackLimitmA);
-      if (Diag::ACK) DIAG(F("ACK baseline=%d/%dmA Threshold=%d/%dmA Duration between %uus and %uus"),
+      if (Diag::ACK) DIAG(F("ACK baseline=%d/%dmA Threshold=%d/%dmA Duration between %lus and %lus"),
 			  baseline,progDriver->raw2mA(baseline),
 			  ackThreshold,progDriver->raw2mA(ackThreshold),
                           minAckPulseDuration, maxAckPulseDuration);
@@ -146,7 +146,7 @@ void DCCACK::setAckPending() {
 
 byte DCCACK::getAck() {
       if (ackPending) return (2);  // still waiting
-      if (Diag::ACK) DIAG(F("%S after %dmS max=%d/%dmA pulse=%uuS samples=%d gaps=%d"),ackDetected?F("ACK"):F("NO-ACK"), ackCheckDuration,
+      if (Diag::ACK) DIAG(F("%S after %dmS max=%d/%dmA pulse=%luS samples=%d gaps=%d"),ackDetected?F("ACK"):F("NO-ACK"), ackCheckDuration,
 			  ackMaxCurrent,progDriver->raw2mA(ackMaxCurrent), ackPulseDuration, numAckSamples, numAckGaps);
       if (ackDetected) return (1); // Yes we had an ack
       return(0);  // pending set off but not detected means no ACK.   

DCCACK.h

@@ -79,10 +79,10 @@ class DCCACK {
     static inline void setAckLimit(int mA) {
 	ackLimitmA = mA;
     }
-    static inline void setMinAckPulseDuration(unsigned int i) {
+    static inline void setMinAckPulseDuration(unsigned long i) {
 	minAckPulseDuration = i;
     }
-    static inline void setMaxAckPulseDuration(unsigned int i) {
+    static inline void setMaxAckPulseDuration(unsigned long i) {
 	maxAckPulseDuration = i;
     }
 
@@ -126,11 +126,11 @@ class DCCACK {
     static unsigned long ackCheckStart; // millis
     static unsigned int ackCheckDuration; // millis       
     
-    static unsigned int ackPulseDuration;  // micros
+    static unsigned long ackPulseDuration;  // micros
     static unsigned long ackPulseStart; // micros
 
-    static unsigned int minAckPulseDuration ; // micros
-    static unsigned int maxAckPulseDuration ; // micros
+    static unsigned long minAckPulseDuration ; // micros
+    static unsigned long maxAckPulseDuration ; // micros
     static MotorDriver* progDriver;
     static volatile uint8_t numAckGaps;
     static volatile uint8_t numAckSamples;

DCCEXParser.cpp

@@ -1073,15 +1073,24 @@ bool DCCEXParser::parseC(Print *stream, int16_t params, int16_t p[]) {
 #ifndef DISABLE_PROG
     case "ACK"_hk: // <D ACK ON/OFF> <D ACK [LIMIT|MIN|MAX|RETRY] Value>
 	if (params >= 3) {
+            long duration;
 	    if (p[1] == "LIMIT"_hk) {
 	      DCCACK::setAckLimit(p[2]);
-	      LCD(1, F("Ack Limit=%dmA"), p[2]);  // <D ACK LIMIT 42>
+	      LCD(1, F("Ack Limit=%dmA"), p[2]);       // <D ACK LIMIT 42>
 	    } else if (p[1] == "MIN"_hk) {
-	      DCCACK::setMinAckPulseDuration(p[2]);
-	      LCD(0, F("Ack Min=%uus"), p[2]);  //   <D ACK MIN 1500>
+	      if (params == 4 && p[3] == "MS"_hk)
+		duration = p[2] * 1000L;
+	      else
+		duration = p[2];
+	      DCCACK::setMinAckPulseDuration(duration);
+	      LCD(0, F("Ack Min=%lus"), duration);     // <D ACK MIN 1500>
 	    } else if (p[1] == "MAX"_hk) {
-	      DCCACK::setMaxAckPulseDuration(p[2]);
-	      LCD(0, F("Ack Max=%uus"), p[2]);  //   <D ACK MAX 9000>
+	      if (params == 4 && p[3] == "MS"_hk)      // <D ACK MAX 80 MS>
+		duration = p[2] * 1000L;
+	      else
+		duration = p[2];
+	      DCCACK::setMaxAckPulseDuration(duration);
+	      LCD(0, F("Ack Max=%lus"), duration);     // <D ACK MAX 9000>
 	    } else if (p[1] == "RETRY"_hk) {
 	      if (p[2] >255) p[2]=3;
 	      LCD(0, F("Ack Retry=%d Sum=%d"), p[2], DCCACK::setAckRetry(p[2]));  //   <D ACK RETRY 2>

DCCTimerAVR.cpp

@@ -185,8 +185,10 @@ int DCCTimer::freeMemory() {
 }
 
 void DCCTimer::reset() {
-  wdt_enable( WDTO_15MS); // set Arduino watchdog timer for 15ms 
-  delay(50);            // wait for the prescaller time to expire
+  // 250ms chosen to circumwent bootloader bug which
+  // hangs at too short timepout (like 15ms)
+  wdt_enable( WDTO_250MS); // set Arduino watchdog timer for 250ms 
+  delay(500);              // wait for it to happen
 
 }
 

DCCTimerESP.cpp

@@ -76,8 +76,13 @@ int DCCTimer::freeMemory() {
 #endif
 
 ////////////////////////////////////////////////////////////////////////
-
 #ifdef ARDUINO_ARCH_ESP32
+
+#include "esp_idf_version.h"
+#if ESP_IDF_VERSION_MAJOR > 4
+#error "DCC-EX does not support compiling with IDF version 5.0 or later. Downgrade your ESP32 library to a version that contains IDE version 4. Arduino ESP32 library 3.0.0 is too new. Downgrade to one of 2.0.9 to 2.0.17"
+#endif
+
 #include "DIAG.h"
 #include <driver/adc.h>
 #include <soc/sens_reg.h>
@@ -292,7 +297,12 @@ void DCCTimer::DCCEXInrushControlOn(uint8_t pin, int duty, bool inverted) {
 int ADCee::init(uint8_t pin) {
   pinMode(pin, ANALOG);
   adc1_config_width(ADC_WIDTH_BIT_12);
+// Espressif deprecated ADC_ATTEN_DB_11 somewhere between 2.0.9 and 2.0.17
+#ifdef ADC_ATTEN_11db
+  adc1_config_channel_atten(pinToADC1Channel(pin),ADC_ATTEN_11db);
+#else
   adc1_config_channel_atten(pinToADC1Channel(pin),ADC_ATTEN_DB_11);
+#endif
   return adc1_get_raw(pinToADC1Channel(pin));
 }
 int16_t ADCee::ADCmax() {

DCCTimerSTM32.cpp

@@ -36,7 +36,20 @@
 #include "DIAG.h"
 #include <wiring_private.h>
 
-#if defined(ARDUINO_NUCLEO_F401RE) || defined(ARDUINO_NUCLEO_F411RE)
+#if defined(ARDUINO_NUCLEO_F401RE)
+// Nucleo-64 boards don't have additional serial ports defined by default
+// Serial1 is available on the F401RE, but not hugely convenient.
+// Rx pin on PB7 is useful, but all the Tx pins map to Arduino digital pins, specifically:
+//   PA9 == D8
+//   PB6 == D10
+// of which D8 is needed by the standard and EX8874 motor shields. D10 would be used if a second
+// EX8874 is stacked. So only disable this if using a second motor shield.
+HardwareSerial Serial1(PB7, PB6);  // Rx=PB7, Tx=PB6 -- CN7 pin 17 and CN10 pin 17
+// Serial2 is defined to use USART2 by default, but is in fact used as the diag console
+// via the debugger on the Nucleo-64. It is therefore unavailable for other DCC-EX uses like WiFi, DFPlayer, etc.
+// Let's define Serial6 as an additional serial port (the only other option for the F401RE)
+HardwareSerial Serial6(PA12, PA11);  // Rx=PA12, Tx=PA11 -- CN10 pins 12 and 14 - F401RE
+#elif defined(ARDUINO_NUCLEO_F411RE)
 // Nucleo-64 boards don't have additional serial ports defined by default
 HardwareSerial Serial1(PB7, PA15);  // Rx=PB7, Tx=PA15 -- CN7 pins 17 and 21 - F411RE
 // Serial2 is defined to use USART2 by default, but is in fact used as the diag console
@@ -54,7 +67,7 @@ HardwareSerial Serial3(PC11, PC10);  // Rx=PC11, Tx=PC10 -- USART3 - F446RE
 HardwareSerial Serial5(PD2, PC12);  // Rx=PD2, Tx=PC12 -- UART5 - F446RE
 // On the F446RE, Serial4 and Serial6 also use pins we can't readily map while using the Arduino pins
 #elif defined(ARDUINO_NUCLEO_F412ZG) || defined(ARDUINO_NUCLEO_F413ZH) || defined(ARDUINO_NUCLEO_F446ZE) || \
-      defined(ARDUINO_NUCLEO_F429ZI) || defined(ARDUINO_NUCLEO_F439ZI)
+      defined(ARDUINO_NUCLEO_F429ZI) || defined(ARDUINO_NUCLEO_F439ZI) || defined(ARDUINO_NUCLEO_F4X9ZI)
 // Nucleo-144 boards don't have Serial1 defined by default
 HardwareSerial Serial6(PG9, PG14);  // Rx=PG9, Tx=PG14 -- USART6
 HardwareSerial Serial5(PD2, PC12);  // Rx=PD2, Tx=PC12 -- UART5

EXRAIL2.cpp

@@ -1,4 +1,5 @@
 /*
+ *  © 2024 Paul M. Antoine
  *  © 2021 Neil McKechnie
  *  © 2021-2023 Harald Barth
  *  © 2020-2023 Chris Harlow
@@ -227,7 +228,6 @@ LookList* RMFT2::LookListLoader(OPCODE op1, OPCODE op2, OPCODE op3) {
     case OPCODE_AT:
     case OPCODE_ATTIMEOUT2:
     case OPCODE_AFTER:
-    case OPCODE_AFTEROVERLOAD:
     case OPCODE_IF:
     case OPCODE_IFNOT: {
       int16_t pin = (int16_t)operand;
@@ -1000,6 +1000,14 @@ void RMFT2::loop2() {
       if ((compileFeatures & FEATURE_LCC) && LCCSerial) 
           StringFormatter::send(LCCSerial,F("<L x%h>"),(uint16_t)operand);
        break; 
+  
+  case OPCODE_ACON:  // MERG adapter 
+  case OPCODE_ACOF: 
+      if ((compileFeatures & FEATURE_LCC) && LCCSerial) 
+          StringFormatter::send(LCCSerial,F("<L x%c%h%h>"),
+          opcode==OPCODE_ACON?'0':'1',
+          (uint16_t)operand,getOperand(progCounter,1));
+       break; 
 
   case OPCODE_LCCX: // long form LCC
        if ((compileFeatures & FEATURE_LCC) && LCCSerial)
@@ -1088,6 +1096,8 @@ void RMFT2::loop2() {
   case OPCODE_PINTURNOUT: // Turnout definition ignored at runtime
   case OPCODE_ONCLOSE: // Turnout event catchers ignored here
   case OPCODE_ONLCC:   // LCC event catchers ignored here 
+  case OPCODE_ONACON:   // MERG event catchers ignored here 
+  case OPCODE_ONACOF:   // MERG event catchers ignored here 
   case OPCODE_ONTHROW:
   case OPCODE_ONACTIVATE: // Activate event catchers ignored here
   case OPCODE_ONDEACTIVATE:
@@ -1143,20 +1153,25 @@ void RMFT2::kill(const FSH * reason, int operand) {
 }
 
 int16_t RMFT2::getSignalSlot(int16_t id) {
-  for (int sigslot=0;;sigslot++) {
-      int16_t sighandle=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigslot*8);
-      if (sighandle==0) { // end of signal list 
-        DIAG(F("EXRAIL Signal %d not defined"), id);
-        return -1;
-      }
-      VPIN sigid = sighandle & SIGNAL_ID_MASK;
+
+  if (id > 0) {
+    int sigslot = 0;
+    int16_t sighandle = 0;
+    // Trundle down the signal list until we reach the end
+    while ((sighandle = GETHIGHFLASHW(RMFT2::SignalDefinitions, sigslot * 8)) != 0)
+    {
       // sigid is the signal id used in RED/AMBER/GREEN macro
       // for a LED signal it will be same as redpin
-      // but for a servo signal it will also have SERVO_SIGNAL_FLAG set. 
-
-      if (sigid != id) continue; // keep looking
-      return sigslot; // relative slot in signals table
-  }  
+      // but for a servo signal it will also have SERVO_SIGNAL_FLAG set.
+      VPIN sigid = sighandle & SIGNAL_ID_MASK;
+      if (sigid == (VPIN)id) // cast to keep compiler happy but id is positive
+        return sigslot;      // found it
+      sigslot++;             // keep looking
+    };
+  }
+  // If we got here, we did not find the signal
+  DIAG(F("EXRAIL Signal %d not defined"), id);
+  return -1;
 }
 
 /* static */ void RMFT2::doSignal(int16_t id,char rag) {

EXRAIL2.h

@@ -69,6 +69,8 @@ enum OPCODE : byte {OPCODE_THROW,OPCODE_CLOSE,OPCODE_TOGGLE_TURNOUT,
              OPCODE_TTADDPOSITION,OPCODE_DCCTURNTABLE,OPCODE_EXTTTURNTABLE,
              OPCODE_ONROTATE,OPCODE_ROTATE,OPCODE_WAITFORTT,
              OPCODE_LCC,OPCODE_LCCX,OPCODE_ONLCC,
+             OPCODE_ACON, OPCODE_ACOF, 
+             OPCODE_ONACON, OPCODE_ONACOF, 
              OPCODE_ONOVERLOAD,
              OPCODE_ROUTE_ACTIVE,OPCODE_ROUTE_INACTIVE,OPCODE_ROUTE_HIDDEN,
              OPCODE_ROUTE_DISABLED,
@@ -187,6 +189,7 @@ class LookList {
   static const FSH *  getTurntablePositionDescription(int16_t turntableId, uint8_t positionId);
   static void startNonRecursiveTask(const FSH* reason, int16_t id,int pc);
   static bool readSensor(uint16_t sensorId);
+  static bool isSignal(int16_t id,char rag); 
    
 private: 
     static void ComandFilter(Print * stream, byte & opcode, byte & paramCount, int16_t p[]);
@@ -196,7 +199,6 @@ private:
     static bool getFlag(VPIN id,byte mask); 
     static int16_t progtrackLocoId;
     static void doSignal(int16_t id,char rag); 
-    static bool isSignal(int16_t id,char rag); 
     static int16_t getSignalSlot(int16_t id);
     static void setTurnoutHiddenState(Turnout * t);
     #ifndef IO_NO_HAL

EXRAIL2MacroReset.h

@@ -99,6 +99,10 @@
 #undef LCCX 
 #undef LCN 
 #undef MOVETT
+#undef ACON
+#undef ACOF
+#undef ONACON
+#undef ONACOF
 #undef MESSAGE
 #undef ONACTIVATE
 #undef ONACTIVATEL
@@ -265,6 +269,10 @@
 #define LCN(msg) 
 #define MESSAGE(msg)
 #define MOVETT(id,steps,activity)
+#define ACON(eventid)
+#define ACOF(eventid)
+#define ONACON(eventid)
+#define ONACOF(eventid)
 #define ONACTIVATE(addr,subaddr)
 #define ONACTIVATEL(linear)
 #define ONAMBER(signal_id) 

EXRAIL2Parser.cpp

@@ -61,47 +61,85 @@ void RMFT2::ComandFilter(Print * stream, byte & opcode, byte & paramCount, int16
   case 'L':
     // This entire code block is compiled out if LLC macros not used 
     if (!(compileFeatures & FEATURE_LCC)) return;
-
+    static int lccProgCounter=0;
+    static int lccEventIndex=0;
+      
     if (paramCount==0) {  //<L>  LCC adapter introducing self
       LCCSerial=stream;   // now we know where to send events we raise
+      opcode=0;  // flag command as intercepted
 
-      // loop through all possible sent events 
-      for (int progCounter=0;; SKIPOP) {
-        byte opcode=GET_OPCODE;
-        if (opcode==OPCODE_ENDEXRAIL) break;
-        if (opcode==OPCODE_LCC)  StringFormatter::send(stream,F("<LS x%h>\n"),getOperand(progCounter,0));   
-        if (opcode==OPCODE_LCCX) { // long form LCC
-           StringFormatter::send(stream,F("<LS x%h%h%h%h>\n"),
+      // loop through all possible sent/waited events 
+      for (int progCounter=lccProgCounter;; SKIPOP) {
+        byte exrailOpcode=GET_OPCODE;
+        switch (exrailOpcode) {
+          case OPCODE_ENDEXRAIL:
+               stream->print(F("<LR>\n")); // ready to roll
+               lccProgCounter=0; // allow a second pass
+               lccEventIndex=0;
+               return;
+
+          case OPCODE_LCC:  
+               StringFormatter::send(stream,F("<LS x%h>\n"),getOperand(progCounter,0));
+               SKIPOP;
+               lccProgCounter=progCounter; 
+               return;
+
+          case OPCODE_LCCX:  // long form LCC
+               StringFormatter::send(stream,F("<LS x%h%h%h%h>\n"),
                  getOperand(progCounter,1),
                  getOperand(progCounter,2),
                  getOperand(progCounter,3),
                  getOperand(progCounter,0)
-                 );        
-        }}
+                 );
+               SKIPOP;SKIPOP;SKIPOP;SKIPOP;          
+               lccProgCounter=progCounter; 
+               return;
+
+          case OPCODE_ACON:  // CBUS ACON 
+          case OPCODE_ACOF:  // CBUS ACOF 
+                StringFormatter::send(stream,F("<LS x%c%h%h>\n"),
+                  exrailOpcode==OPCODE_ACOF?'1':'0',
+                  getOperand(progCounter,0),getOperand(progCounter,1)); 
+               SKIPOP;SKIPOP;
+               lccProgCounter=progCounter; 
+               return;
       
       // we stream the hex events we wish to listen to
       // and at the same time build the event index looku.
       
-      
-      int eventIndex=0;
-      for (int progCounter=0;; SKIPOP) {
-        byte opcode=GET_OPCODE;
-        if (opcode==OPCODE_ENDEXRAIL) break;
-        if (opcode==OPCODE_ONLCC) {
-           onLCCLookup[eventIndex]=progCounter; // TODO skip...
+        case OPCODE_ONLCC:
            StringFormatter::send(stream,F("<LL %d x%h%h%h:%h>\n"),
-                 eventIndex,
+                 lccEventIndex,
                  getOperand(progCounter,1),
                  getOperand(progCounter,2),
                  getOperand(progCounter,3),
                  getOperand(progCounter,0)
                  );   
-           eventIndex++;      
-        }
+           SKIPOP;SKIPOP;SKIPOP;SKIPOP;      
+           // start on handler at next      
+           onLCCLookup[lccEventIndex]=progCounter; 
+           lccEventIndex++;        
+           lccProgCounter=progCounter; 
+           return;
+
+        case OPCODE_ONACON:
+        case OPCODE_ONACOF:
+           StringFormatter::send(stream,F("<LL %d x%c%h%h>\n"),
+                 lccEventIndex,
+                 exrailOpcode==OPCODE_ONACOF?'1':'0',
+                 getOperand(progCounter,0),getOperand(progCounter,1)
+                 ); 
+           SKIPOP;SKIPOP;
+           // start on handler at next      
+           onLCCLookup[lccEventIndex]=progCounter; 
+           lccEventIndex++;        
+           lccProgCounter=progCounter; 
+           return;
+           
+         default:
+           break;
+        }  
       }
-      StringFormatter::send(stream,F("<LR>\n")); // Ready to rumble
-      opcode=0;
-      break;
     }
     if (paramCount==1) {  // <L eventid> LCC event arrived from adapter
         int16_t eventid=p[0];

EXRAILMacros.h

@@ -75,7 +75,7 @@
 // Pass 1 Implements aliases 
 #include "EXRAIL2MacroReset.h"
 #undef ALIAS
-#define ALIAS(name,value...) const int name= 1##value##0 ==10 ? -__COUNTER__  : value##0/10; 
+#define ALIAS(name,value...) const int name= #value[0] ? value+0: -__COUNTER__ ; 
 #include "myAutomation.h"
 
 // Pass 1d Detect sequence duplicates.
@@ -189,6 +189,14 @@ bool exrailHalSetup() {
 #define LCCX(senderid,eventid) | FEATURE_LCC 
 #undef ONLCC
 #define ONLCC(senderid,eventid) | FEATURE_LCC
+#undef ACON
+#define ACON(eventid) | FEATURE_LCC
+#undef ACOF
+#define ACOF(eventid) | FEATURE_LCC
+#undef ONACON
+#define ONACON(eventid) | FEATURE_LCC
+#undef ONACOF
+#define ONACOF(eventid) | FEATURE_LCC
 #undef ROUTE_ACTIVE
 #define ROUTE_ACTIVE(id) | FEATURE_ROUTESTATE
 #undef ROUTE_INACTIVE
@@ -429,10 +437,14 @@ const  HIGHFLASH  int16_t RMFT2::SignalDefinitions[] = {
     #include "myAutomation.h"
     0,0,0,0 };
 
-// Pass 9 ONLCC counter and lookup array
+// Pass 9 ONLCC/ ONMERG counter and lookup array
 #include "EXRAIL2MacroReset.h"
 #undef ONLCC
 #define ONLCC(sender,event) +1 
+#undef ONACON
+#define ONACON(event) +1 
+#undef ONACOF
+#define ONACOF(event) +1 
 
 const int RMFT2::countLCCLookup=0
 #include "myAutomation.h"
@@ -529,6 +541,10 @@ int RMFT2::onLCCLookup[RMFT2::countLCCLookup];
         OPCODE_PAD,V((((uint64_t)sender)>>32)&0xFFFF),\
         OPCODE_PAD,V((((uint64_t)sender)>>16)&0xFFFF),\
         OPCODE_PAD,V((((uint64_t)sender)>>0)&0xFFFF),  
+#define ACON(eventid) OPCODE_ACON,V(((uint32_t)eventid >>16) & 0xFFFF),OPCODE_PAD,V(eventid & 0xFFFF),
+#define ACOF(eventid) OPCODE_ACOF,V(((uint32_t)eventid >>16) & 0xFFFF),OPCODE_PAD,V(eventid & 0xFFFF),
+#define ONACON(eventid) OPCODE_ONACON,V((uint32_t)(eventid) >>16),OPCODE_PAD,V(eventid & 0xFFFF),
+#define ONACOF(eventid) OPCODE_ONACOF,V((uint32_t)(eventid) >>16),OPCODE_PAD,V(eventid & 0xFFFF),
 #define LCD(id,msg) PRINT(msg)
 #define SCREEN(display,id,msg) PRINT(msg)
 #define STEALTH(code...) PRINT(dummy)

GITHUB_SHA.h

@@ -1 +1 @@
-#define GITHUB_SHA "devel-202404211704Z"
+#define GITHUB_SHA "devel-202406182019Z"

KeywordHasher.h

@@ -26,7 +26,7 @@
  Thus  "MAIN"_hk  generates exactly the same run time vakue 
  as   const int16_t HASH_KEYWORD_MAIN=11339  
 */
-#ifndef KeywordHAsher_h
+#ifndef KeywordHasher_h
 #define KeywordHasher_h
 
 #include <Arduino.h>

MotorDriver.cpp

@@ -638,6 +638,10 @@ void MotorDriver::checkPowerOverload(bool useProgLimit, byte trackno) {
       }
       throttleInrush(false);
       setPower(POWERMODE::ON);
+      break;
+    }
+    if (goodtime > POWER_SAMPLE_ALERT_GOOD/2) {
+      throttleInrush(false);
     }
     break;
   }

MotorDrivers.h

@@ -97,6 +97,18 @@
  new MotorDriver(25/* 3*/, 19/*12*/, UNUSED_PIN, 13/*9*/, 35/*A2*/, 1.27, 5000, 36 /*A4*/), \
  new MotorDriver(23/*11*/, 18/*13*/, UNUSED_PIN, 12/*8*/, 34/*A3*/, 1.27, 5000, 39 /*A5*/)
 
+// EX-CSB1 with integrated motor driver definition
+#define EXCSB1 F("EXCSB1"),\
+ new MotorDriver(25,  0, UNUSED_PIN, -14, 34, 2.23, 5000, 19), \
+ new MotorDriver(27, 15, UNUSED_PIN,  -2, 35, 2.23, 5000, 23)
+
+// EX-CSB1 with EX-8874 stacked on top for 4 outputs
+#define EXCSB1_WITH_EX8874 F("EXCSB1_WITH_EX8874"),\
+ new MotorDriver(25,  0, UNUSED_PIN, -14, 34, 2.23, 5000, 19), \
+ new MotorDriver(27, 15, UNUSED_PIN,  -2, 35, 2.23, 5000, 23), \
+ new MotorDriver(26,  5, UNUSED_PIN,  13, 36, 1.52, 5000, 18), \
+ new MotorDriver(16,  4, UNUSED_PIN,  12, 39, 1.52, 5000, 17)
+
 #else
 // STANDARD shield on any Arduino Uno or Mega compatible with the original specification.
 #define STANDARD_MOTOR_SHIELD F("STANDARD_MOTOR_SHIELD"),                                                 \

TrackManager.cpp

@@ -35,7 +35,7 @@
     
 #define APPLY_BY_MODE(findmode,function) \
         FOR_EACH_TRACK(t) \
-	    if (track[t]->getMode()==findmode)	\
+	    if (track[t]->getMode() & findmode)	\
                 track[t]->function;
 
 MotorDriver * TrackManager::track[MAX_TRACKS] = { NULL };
@@ -398,7 +398,7 @@ bool TrackManager::parseEqualSign(Print *stream, int16_t params, int16_t p[])
     if (params==2  && p[1]=="AUTO"_hk) // <= id AUTO>
       return setTrackMode(p[0], track[p[0]]->getMode() | TRACK_MODE_AUTOINV);
 
-    if (params==2  && p[1]=="INV"_hk) // <= id AUTO>
+    if (params==2  && p[1]=="INV"_hk) // <= id INV>
       return setTrackMode(p[0], track[p[0]]->getMode() | TRACK_MODE_INV);
 
     if (params==3  && p[1]=="DC"_hk && p[2]>0) // <= id DC cab>

WifiInterface.cpp

@@ -1,4 +1,5 @@
 /*
+ *  © 2022-2024 Paul M. Antoine
  *  © 2021 Fred Decker
  *  © 2020-2022 Harald Barth
  *  © 2020-2022 Chris Harlow
@@ -70,7 +71,7 @@ Stream * WifiInterface::wifiStream;
 #define SERIAL3 Serial5
 #elif defined(ARDUINO_NUCLEO_F413ZH) || defined(ARDUINO_NUCLEO_F429ZI) \
     || defined(ARDUINO_NUCLEO_F446ZE) || defined(ARDUINO_NUCLEO_F412ZG) \
-    || defined(ARDUINO_NUCLEO_F439ZI)
+    || defined(ARDUINO_NUCLEO_F439ZI) || defined(ARDUINO_NUCLEO_F4X9ZI)
 #define NUM_SERIAL 2
 #define SERIAL1 Serial6
 #else

platformio.ini

@@ -164,7 +164,11 @@ monitor_echo = yes
 build_flags = -mcall-prologues
 
 [env:ESP32]
-platform = espressif32
+; Lock version to 6.7.0 as that is
+; Arduino v2.0.16 (based on IDF v4.4.7)
+; which is the latest version based
+; on IDF v4. We can not use IDF v5.
+platform = espressif32 @ 6.7.0
 board = esp32dev
 framework = arduino
 lib_deps = ${env.lib_deps}

version.h

@@ -3,7 +3,19 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.2.54"
+#define VERSION "5.2.62"
+// 5.2.62 - Allow acks way longer than standard
+// 5.2.61 - Merg CBUS  ACON/ACOF/ONACON/ONACOF Adapter interface.
+//        - LCC Adapter interface throttled startup,
+//          (Breaking change woith Adapter base code)
+// 5.2.60 - Bugfix: Opcode AFTEROVERLOAD does not have an argument that is a pin and needs to be initialized
+//        - Remove inrush throttle after half good time so that we go to mode overload if problem persists
+// 5.2.59 - STM32 bugfix correct Serial1 definition for Nucleo-F401RE
+//        - STM32 add support for ARDUINO_NUCLEO_F4X9ZI type to span F429/F439 in upcoming STM32duino release v2.8 as a result of our PR
+// 5.2.58 - EXRAIL ALIAS allows named pins
+// 5.2.57 - Bugfix autoreverse: Apply mode by binart bit match and not by equality
+// 5.2.56 - Bugfix and refactor for EXRAIL getSignalSlot
+// 5.2.55 - Move EXRAIL isSignal() to public to allow use in STEALTH call
 // 5.2.54 - Bugfix for EXRAIL signal handling for active high 
 // 5.2.53 - Bugfix for EX-Fastclock, call I2CManager.begin() before checking I2C address 
 // 5.2.52 - Bugfix for ADCee() to handle ADC2 and ADC3 channel inputs on F446ZE and others