peteGSX
878549d538
Working on analogue inputs
2023-01-23 16:26:07 +10:00
peteGSX
7f4e3d9cea
Digital inputs optimised
2023-01-23 11:49:23 +10:00
peteGSX
f2aeb4069f
Merge pull request #296 from DCC-EX:294-bug-report-ex-rail-signalsignalh-inverted
...
294-bug-report-ex-rail-signalsignalh-inverted
2023-01-23 04:59:54 +10:00
peteGSX
aaf25d5426
Remove excess comments
2023-01-23 04:53:39 +10:00
Neil McKechnie
705617239f
Sort out I2C timeout handling, and further I2C diagnostics.
...
Timeout handling and recovery in loop() function now operative.
Start-up check for I2C signals short to ground added.
Initial I2C device probe speed up.
Possible infinite loops in I2C AVR native driver during fault conditions removed.
2023-01-22 13:13:20 +00:00
Neil McKechnie
bfbc45674f
Update IO_AnalogueInputs.h
...
Add I2C initialisation calls (previously missing).
2023-01-22 12:38:24 +00:00
Neil McKechnie
e079a9e395
Update IO_VL53L0X.h
...
Improve address changing logic.
2023-01-22 12:37:16 +00:00
peteGSX
fb9170ab8b
SIGNAL/SIGNALH operating correctly
2023-01-22 19:25:00 +10:00
Colin Murdoch
286bdc3c4d
Create platformio.ini.original
2023-01-21 10:20:49 +00:00
Colin Murdoch
cd46d3c9e0
Remove #ifdef and merge calcs
...
Remove #idfef statements and merge duplicate routines into CommandDistributor
2023-01-21 10:18:54 +00:00
pmantoine
fb36bd1380
Fix F446 Serial Pin Comment (Rx/Tx)
2023-01-17 20:15:30 +08:00
Colin Murdoch
b62c4da04d
Update CommandDistributor.h
...
Fixed #endif typo.
2023-01-17 10:56:12 +00:00
Neil McKechnie
ccf463b507
IODevice.cpp: Fix error in overlap checking.
...
The checkNoOverlap() function didn't work correctly in the case where one device has nPins=0. All devices configured after that were rejected, even when no overlap was present.
2023-01-16 23:03:53 +00:00
Neil McKechnie
abf62dfd85
IO_VL53L0X driver: improve I2C error checking and reporting.
2023-01-16 23:00:58 +00:00
Colin Murdoch
8fac20a451
Add #ifdef selections
...
Add #ifdef selections linked to #define in config.exampe.h
2023-01-16 18:16:25 +00:00
Neil McKechnie
7c25f22939
Fix error reported in IO_DFPlayer.h when compiling for some platforms
2023-01-14 23:50:33 +00:00
Neil McKechnie
0c054c4d42
Merge branch 'devel' into devel-nmck
2023-01-14 23:37:17 +00:00
Neil McKechnie
538519dd9d
Add option to suppress I2C retries.
...
I2CRB method suppressRetries() added to allow retries to be suppressed.
2023-01-14 18:58:06 +00:00
Neil McKechnie
6e69df2da8
Add I2C retries to Wire and to non-blocking I2CManager.
2023-01-14 18:18:57 +00:00
Neil McKechnie
3c5b7bbcfe
HAL updates
...
Remove redundant deferment of device _begin() calls (no longer necessary).
Improve diagnostic loop measurement.
2023-01-14 17:15:30 +00:00
Neil McKechnie
79437bbf37
Update MotorDriver.cpp
...
Remove unnecessary and undesirable interrupt disable/enable when writing to HAL driver.
2023-01-14 17:10:45 +00:00
pmantoine
1be382a6ed
Fixed comment re Serial1 for STM32F446RE
2023-01-14 12:45:21 +08:00
pmantoine
1f433d0c17
Serial1 for STM32F446RE corrected.
2023-01-14 12:43:05 +08:00
pmantoine
046e62a8b3
Minor fix to DCCTimerSTM32.cpp for F412ZG.
2023-01-13 17:24:26 +08:00
peteGSX
a2c7c7d12a
Merge pull request #292 from DCC-EX:exio-prevent-digital-analogue-conflict
...
Exio-prevent-digital-analogue-conflict
2023-01-12 08:21:13 +10:00
peteGSX
9b36bdcf46
Logic and diag message done
2023-01-12 08:10:41 +10:00
peteGSX
a8646a2f32
Fix EX-Turntable diag message
2023-01-12 07:33:50 +10:00
peteGSX
22e20f9092
Logic added and working
2023-01-12 07:27:42 +10:00
Colin Murdoch
873d470f86
Supply missing function
...
Supply missing function
2023-01-11 19:50:39 +00:00
Colin Murdoch
ff7260b9bc
Added code for FastClock
...
Added code for both I2C fastclock and serial clocks
2023-01-11 17:36:11 +00:00
peteGSX
de4954ca3e
Merge pull request #288 from DCC-EX:debug-ex-io-expander-on-mega
...
Debug-ex-io-expander-on-mega
2023-01-10 20:11:45 +10:00
peteGSX
c26f53e1fa
Device driver fixed
2023-01-10 20:05:09 +10:00
peteGSX
e48a40fafb
Change to blocking I2CManager calls
2023-01-10 13:07:54 +10:00
peteGSX
5c120efa16
Add being
2023-01-10 08:16:42 +10:00
peteGSX
9abcfb9e4f
Add begin delay to test
2023-01-09 20:08:36 +10:00
peteGSX
e01893bcf1
Comment out unused variables
2023-01-09 20:03:18 +10:00
pmantoine
6eff836473
Add -Wunused-variable build flag to Nucleo builds
2023-01-09 17:18:50 +08:00
pmantoine
402e16727c
Fix platformio for Nucleo-F446RE
2023-01-09 16:47:29 +08:00
pmantoine
658fca2601
Nucleo-F446RE Build target support
2023-01-09 16:24:29 +08:00
peteGSX
3fccf6a484
Fix EX-IOExpander myHal.cpp example
2023-01-03 08:57:21 +10:00
peteGSX
ace9c1642a
Merge pull request #285 from DCC-EX:add-rotary-encoder
...
New working rotary encoder branch
2022-12-30 10:38:10 +10:00
peteGSX
ec4dfb8c1e
New working rotary encoder branch
2022-12-30 09:46:42 +10:00
peteGSX
6482a421b4
Merge pull request #282 from DCC-EX/add-ex-ioexpander
...
Add-ex-ioexpander
2022-12-30 08:10:23 +10:00
peteGSX
d02c6b1f61
Merge branch 'devel' into add-ex-ioexpander
2022-12-30 08:04:49 +10:00
Asbelos
94c8dafeb2
renamed macros
2022-12-29 10:38:04 +00:00
peteGSX
322cb3db54
Include driver in IODevice.h
2022-12-29 08:44:08 +10:00
peteGSX
ffdf023de6
Clean up
2022-12-29 05:10:37 +10:00
peteGSX
8f32ae712f
Fix myHal example
2022-12-27 10:13:08 +10:00
peteGSX
eea1396997
Remove EX-IO pin macros
2022-12-27 10:10:44 +10:00
Asbelos
b1bd28273d
duinoNodes support
2022-12-26 11:06:42 +00:00
