Harald Barth
bfa33a9df7
Fix STM32 set right port mode bits for analog port
2023-04-10 01:47:00 +02:00
Harald Barth
49c0a1a55a
Merge branch 'devel' of https://github.com/DCC-EX/CommandStation-EX into devel
2023-04-08 23:35:48 +02:00
Harald Barth
9b7d1ae858
STM32: Use predefined function for pinnames
2023-04-08 23:33:33 +02:00
Colin Murdoch
c11d8f6359
Add TURNOUTL Macro to EXRAIL
...
Add TURNOUTL Macro to EXRAIL and retrospective update to version.h to record addition of EX-FastClock mods.
2023-04-08 17:22:39 +01:00
pmantoine
3868bb19ac
More uint type fixes
2023-04-08 14:51:10 +08:00
pmantoine
7589917638
STM32 ADCee fix
2023-04-08 14:15:38 +08:00
Harald Barth
0d82370380
devel date
2023-04-07 20:46:20 +02:00
Harald Barth
ff6034dff2
curl only needed when downloading
2023-04-07 20:45:21 +02:00
Harald Barth
5d0de6b807
platformio wants this
2023-04-07 20:44:40 +02:00
pmantoine
c3d2e5b222
Fix to PIO build target names for Teensy
2023-04-07 13:59:49 +10:00
Asbelos
273f55b143
4.2.41 Hal setup and DNOU8 fix
2023-04-05 23:19:43 +01:00
peteGSX
86cb8f4666
Merge pull request #327 from DCC-EX:auto-disable-default-i2c
...
Added disable logic
2023-04-06 07:09:32 +10:00
peteGSX
9571088e1b
Added disable logic
2023-04-06 07:03:59 +10:00
Neil McKechnie
1b4faa92cd
Update IO_DFPlayer.h
...
Reinstate STOP command in place of PAUSE, as PAUSE was being reported differently to STOP in the status response.
2023-03-31 17:58:30 +01:00
Neil McKechnie
6fbaca7930
Update IO_DFPlayer.h
...
Ensure device goes off-line when not responding.
2023-03-31 16:50:18 +01:00
Neil McKechnie
6b535654f8
DFplayer driver now polls device to detect failures and errors.
...
Add cyclic (1-second) poll of DFplayer device to detect if it goes unresponsive.
2023-03-31 16:40:40 +01:00
peteGSX
2c943d250e
Merge pull request #326 from DCC-EX:287-to-do-clean-up-rotary-encoder-device-driver-compile-time-warning
...
Cleaned up warning
2023-03-30 07:01:40 +10:00
peteGSX
89664eff9d
Cleaned up warning
2023-03-30 06:54:18 +10:00
f8b054cf6a
[ESP32] Use GPIO 35/A2 and 34/A3 for current sensing ( #325 )
...
* [ESP32] Use GPIO 35/A2 and 34/A3 for current sensing while used in combination with the standard Motor Shield
* Update version.h changelog
2023-03-27 10:44:47 -04:00
Neil McKechnie
d2a8aebd0f
Merge branch 'devel' of https://github.com/DCC-EX/CommandStation-EX into devel
2023-03-27 13:08:19 +01:00
Neil McKechnie
86c3020672
Correct display of high VPIN numbers in diagnostic output.
...
No functional change.
VPINs are unsigned integers in the range 0-65535 (although the highest values are special, 65535=VPIN_NONE). Values above 32767 were erroneously being displayed as negative. This has been fixed, which is a pre-requisite for allowing VPINs above 32767 to be used.
2023-03-27 13:08:14 +01:00
Neil McKechnie
60ea7f081a
Correct display of high VPIN numbers in diagnostic output.
...
No functional change.
VPINs are unsigned integers in the range 0-65535 (although the highest values are special, 65535=VPIN_NONE). Values above 32767 were erroneously being displayed as negative. This has been fixed, which is a pre-requisite for allowing VPINs above 32767 to be used.
2023-03-27 13:03:19 +01:00
Neil McKechnie
f348857ddb
Add FLAGS device for EX-RAIL state communications. Improve VPIN display in messages.
...
FLAGS HAL device added to IODevice.h, which allows use of SET/RESET/<Z>/<T> to set and reset a VPIN state, and to allow <S>/IF/IFNOT/AT/WAITFOR/etc. to monitor the VPIN state.
Also, correct handling of VPINs above 32767 in DIAG calls within IODevice.cpp and IODevice.h.
2023-03-27 12:39:11 +01:00
Harald Barth
bdd4bc9999
version
2023-03-25 22:26:57 +01:00
Harald Barth
8a425fe0ef
do not broadcast a turnout state that has not changed 2
2023-03-25 19:28:37 +01:00
Harald Barth
1ec378281b
do not broadcast a turnout state that has not changed
2023-03-25 12:14:58 +01:00
Asbelos
51a480dff3
doc typo only
2023-03-24 00:24:03 +00:00
Asbelos
f0ee8aeb85
z Commands
2023-03-23 19:52:49 +00:00
peteGSX
94d0aa92d9
Merge pull request #324 from DCC-EX:fix-analogue-input-bug
...
Fix-analogue-input-bug
2023-03-21 07:09:52 +10:00
peteGSX
82c447e8a4
Merge branch 'fix-analogue-input-bug' of https://github.com/DCC-EX/CommandStation-EX into fix-analogue-input-bug
2023-03-21 07:04:19 +10:00
peteGSX
a3d03ac68c
Fix validated, update version
2023-03-21 07:04:08 +10:00
peteGSX
b183439a5b
Using correct size for memcpy
2023-03-21 07:03:23 +10:00
Harald Barth
d51281f1f2
github tag
2023-03-20 21:24:42 +01:00
Harald Barth
168368864c
Merge branch 'devel' of https://github.com/DCC-EX/CommandStation-EX into devel
2023-03-20 21:23:02 +01:00
Harald Barth
a75ca00e3c
exchange pin number to track letter part 2
2023-03-20 21:22:48 +01:00
peteGSX
7ab5f556d9
Using correct size for memcpy
2023-03-21 05:30:33 +10:00
peteGSX
337bd969a1
Merge pull request #323 from DCC-EX:ex-io-analogue-input-bug
...
Fixed non-working analogue inputs
2023-03-20 19:11:59 +10:00
Harald Barth
21c99c8694
improve Wifi connect messages
2023-03-20 10:11:14 +01:00
peteGSX
4087cd6e29
Fixed non-working analogue inputs
2023-03-20 19:05:53 +10:00
Harald Barth
2fb485847f
exchange pin number to track letter
2023-03-20 10:03:02 +01:00
Neil McKechnie
43c7baf8f5
Fix display scrolling on LCD and OLED
...
Eliminate spurious blanking of screen in mode 1, duplicated lines of text in mode 2, and non-display of more than the first screen-full of lines in mode 0.
2023-03-19 22:06:02 +00:00
Neil McKechnie
2e1a2d38e3
Update IO_EXIOExpander.h
...
Reinstate byte-wise processing of analogue input values.
2023-03-19 01:20:20 +00:00
Asbelos
fe18341994
Update myAutomation.example.h
...
better example with power on
2023-03-18 18:53:48 +00:00
Asbelos
329dc41452
Remove implicit AUTOSTART
2023-03-18 18:52:01 +00:00
Neil McKechnie
c4b4e11a67
Update IO_EXIOExpander.h
...
Avoid repeated error messages for a single fault.
2023-03-18 15:30:14 +00:00
Neil McKechnie
e55dc51bdb
EX-IOExpander updates
2023-03-18 15:05:21 +00:00
Neil McKechnie
5dd2770442
Update IO_HCSR04.h
...
Modify mode of measurement so that the driver doesn't loop for long periods waiting for the incoming pulse to complete. Original loop behaviour can be reinstated by adding LOOP option in create call (see comment header in file).
2023-03-17 21:15:26 +00:00
Neil McKechnie
d67b07fe46
Merge branch 'devel' of https://github.com/DCC-EX/CommandStation-EX into devel
2023-03-15 18:10:30 +00:00
Neil McKechnie
3073061596
Update IO_DFPlayer.h
...
Bugfix, volume not working correctly.
2023-03-15 18:10:27 +00:00
Harald Barth
278347756a
Bugfix Scroll LCD without empty lines and consistent
2023-03-15 16:41:02 +01:00
