.github
Fix support request issue template
2022-11-05 05:17:03 +10:00
Release - Architecture Doc
Update version.h
2023-02-22 21:28:16 +00:00
Release_Notes
doc typo only
2023-03-24 00:24:03 +00:00
.gitattributes
do not touch CR or CRLF of svg files
2020-11-26 15:55:52 +01:00
.gitignore
Update .gitignore
2023-06-29 14:24:51 -04:00
.travis.yml
Initial commit
2020-05-25 01:43:34 -06:00
CommandDistributor.cpp
cast to big enough type
2023-05-24 22:58:21 +02:00
CommandDistributor.h
Broadcast changes in EXRAIlr
2023-05-01 14:25:45 +01:00
CommandStation-EX.ino
copyright, version and compile warnings fix
2023-07-08 08:58:00 +02:00
config.example.h
copyright, version and compile warnings fix
2023-07-08 08:58:00 +02:00
CONTRIBUTING.md
Create CONTRIBUTING.md
2020-12-08 07:34:59 -05:00
DCC.cpp
Start motordriver as soon as possible but without waveform
2023-06-22 22:57:59 +02:00
DCC.h
Start motordriver as soon as possible but without waveform
2023-06-22 22:57:59 +02:00
DCCACK.cpp
Bugfix: execute 30ms off time before rejoin
2023-08-24 10:03:29 +02:00
DCCACK.h
rename FAIL to CALLFAIL because of conflict in ESP32 IDE
2022-03-04 23:35:14 +01:00
DCCEX.h
Rename LCDDisplay class to Display; renameEXRAIL LCD2 macro to SCREEN
2023-02-11 23:37:09 +00:00
DCCEXParser.cpp
Add support for HBRIDGE Turnouts, allowing control of Kato turnouts that require reverse of polarity and short power application, easily configurable through 2-pin controlled Motor H-Bridge.
2023-11-06 21:54:25 -05:00
DCCEXParser.h
return success/fail from <f> and <F> command handling (setFn, parsef)
2022-08-20 18:15:18 +02:00
DCCRMT.cpp
ESP32 protect from race in RMT code
2023-07-06 15:19:44 +02:00
DCCRMT.h
Send inverted signal (DCC and DC mode) on ESP32 if signalPin2 defined in MotorDriver
2022-08-13 09:12:53 +02:00
DCCTimer.h
Optimize DCCTimerARV.cpp
2023-06-19 00:06:04 +02:00
DCCTimerAVR.cpp
STM32 ADCee highestPin
2023-06-19 17:47:42 +08:00
DCCTimerESP.cpp
ESP32: ledcSetup before ledcAttach
2023-07-17 02:22:35 +02:00
DCCTimerMEGAAVR.cpp
Add MEGAAVR ADCeee skeleton.
2022-11-02 13:55:10 +08:00
DCCTimerSAMD.cpp
More uint type fixes
2023-04-08 14:51:10 +08:00
DCCTimerSTM32.cpp
More Nucleo variant defines
2023-07-31 16:51:25 +08:00
DCCTimerTEENSY.cpp
Add Teensy ADCee class skeleton.
2022-11-02 13:46:16 +08:00
DCCWaveform.cpp
ESP32 protect from race in RMT code
2023-07-06 15:19:44 +02:00
DCCWaveform.h
protect from NULL deref if running without prog track
2022-08-13 01:52:44 +02:00
defines.h
Set WIFI_FORCE_AP default as false
2023-07-09 12:04:40 +02:00
DIAG.h
Rename LCDDisplay class to Display; renameEXRAIL LCD2 macro to SCREEN
2023-02-11 23:37:09 +00:00
Display_Implementation.h
Support for multiple displays
2023-02-16 16:41:13 +00:00
Display.cpp
exchange pin number to track letter part 2
2023-03-20 21:22:48 +01:00
Display.h
Fix display scrolling on LCD and OLED
2023-03-19 22:06:02 +00:00
DisplayInterface.cpp
Revert "Update DisplayInterface.cpp"
2023-02-24 09:39:00 +00:00
DisplayInterface.h
Update DisplayInterface.h
2023-02-23 10:36:42 +00:00
EEStore.cpp
(c) and version tag
2022-07-30 23:08:42 +02:00
EEStore.h
SAMD Support Initial Patches
2022-05-17 18:06:08 +08:00
EthernetInterface.cpp
Bugfix Ethernet shield: Static IP now possible
2023-03-10 17:49:51 +01:00
EthernetInterface.h
Make EthernetInterface code more robust
2022-11-07 11:53:56 +01:00
EX-CommandStation-installer.exe
Rename installer exe
2023-04-11 11:48:35 +10:00
EXRAIL.h
Rename RMFT files and references to EXRAIL ( #201 )
2022-01-30 12:31:26 -05:00
EXRAIL2.cpp
Merge 6e9a3ebfb4 into 28d60d4984
2024-02-16 22:10:04 +01:00
EXRAIL2.h
Add support for HBRIDGE Turnouts, allowing control of Kato turnouts that require reverse of polarity and short power application, easily configurable through 2-pin controlled Motor H-Bridge.
2023-11-06 21:54:25 -05:00
EXRAIL2MacroReset.h
Add support for HBRIDGE Turnouts, allowing control of Kato turnouts that require reverse of polarity and short power application, easily configurable through 2-pin controlled Motor H-Bridge.
2023-11-06 21:54:25 -05:00
EXRAILMacros.h
Add support for HBRIDGE Turnouts, allowing control of Kato turnouts that require reverse of polarity and short power application, easily configurable through 2-pin controlled Motor H-Bridge.
2023-11-06 21:54:25 -05:00
FSH.h
Ensure correct functions are called for strcpy_P, strncmp_P, strlen_P etc. on non-AVR targets..
2023-01-23 22:28:43 +00:00
GITHUB_SHA.h
Committing a SHA
2023-08-07 20:25:14 +02:00
I2CManager_AVR.h
Remove redundant commented out code.
2023-02-23 20:16:29 +00:00
I2CManager_Mega4809.h
I2CManager: Update native drivers for MUX support from the common code.
2023-02-10 15:47:44 +00:00
I2CManager_NonBlocking.h
Update I2CManager_NonBlocking.h
2023-02-16 22:27:23 +00:00
I2CManager_SAMD.h
Update I2CManager_SAMD.h
2023-02-10 18:21:06 +00:00
I2CManager_STM32.h
Update version.h
2023-02-22 21:28:16 +00:00
I2CManager_Wire.h
Update I2CManager_Wire.h
2023-02-25 11:43:36 +00:00
I2CManager.cpp
Shorten I2C error message
2023-03-15 09:39:20 +00:00
I2CManager.h
Update to comments
2023-02-25 11:42:12 +00:00
install_via_powershell.cmd
Add exe version
2023-04-11 10:26:15 +10:00
installer.json
Frightrisk ver4 ( #205 )
2022-02-16 12:02:11 -05:00
installer.ps1
Add exe version
2023-04-11 10:26:15 +10:00
installer.sh
Do not invoke graphical install on Raspbian
2023-07-06 16:58:36 +02:00
IO_AnalogueInputs.h
Correct display of high VPIN numbers in diagnostic output.
2023-03-27 13:08:14 +01:00
IO_DCCAccessory.cpp
Correct display of high VPIN numbers in diagnostic output.
2023-03-27 13:08:14 +01:00
IO_DFPlayer.h
Update IO_DFPlayer.h
2023-03-31 17:58:30 +01:00
IO_duinoNodes.h
4.2.41 Hal setup and DNOU8 fix
2023-04-05 23:19:43 +01:00
IO_ExampleSerial.h
Correct display of high VPIN numbers in diagnostic output.
2023-03-27 13:08:14 +01:00
IO_EXFastclock.h
Update IO_EXFastclock.h
2023-02-23 20:23:08 +00:00
IO_EXIOExpander.h
Bugfix: allocate enough bytes for digital pins. Add more sanity checks when allocating memory
2024-01-20 21:45:09 +01:00
IO_EXTurntable.h
RotaryEnoder, EX-Turntable fixes
2023-07-01 05:18:45 +10:00
IO_GPIOBase.h
Correct display of high VPIN numbers in diagnostic output.
2023-03-27 13:08:14 +01:00
IO_HALDisplay.h
Update IO_HALDisplay.h
2023-03-09 15:59:52 +00:00
IO_HCSR04.h
Correct display of high VPIN numbers in diagnostic output.
2023-03-27 13:08:14 +01:00
IO_MCP23008.h
Prepare HAL device drivers to support Extended I2C Addresses
2023-02-07 14:55:14 +00:00
IO_MCP23017.h
Prepare HAL device drivers to support Extended I2C Addresses
2023-02-07 14:55:14 +00:00
IO_PCA9555.h
GPIO PCA9555 / TCA9555 support
2023-07-29 20:34:39 +01:00
IO_PCA9685.cpp
Correct display of high VPIN numbers in diagnostic output.
2023-03-27 13:08:14 +01:00
IO_PCA9685pwm.h
Correct display of high VPIN numbers in diagnostic output.
2023-03-27 13:08:14 +01:00
IO_PCF8574.h
Prepare HAL device drivers to support Extended I2C Addresses
2023-02-07 14:55:14 +00:00
IO_PCF8575.h
Prepare HAL device drivers to support Extended I2C Addresses
2023-02-07 14:55:14 +00:00
IO_RotaryEncoder.h
RotaryEnoder, EX-Turntable fixes
2023-07-01 05:18:45 +10:00
IO_ScheduledPin.h
While verifying with real hardware, added micros() into the logs for ScheduledPin
2023-11-10 23:47:20 -05:00
IO_Servo.cpp
Servo driver - split PCA9685 into a filter + PWM driver.
2023-02-07 17:24:05 +00:00
IO_Servo.h
Correct display of high VPIN numbers in diagnostic output.
2023-03-27 13:08:14 +01:00
IO_TouchKeypad.h
Correct display of high VPIN numbers in diagnostic output.
2023-03-27 13:08:14 +01:00
IO_VL53L0X.h
Correct display of high VPIN numbers in diagnostic output.
2023-03-27 13:08:14 +01:00
IODevice.cpp
Added disable logic
2023-04-06 07:03:59 +10:00
IODevice.h
Add FLAGS device for EX-RAIL state communications. Improve VPIN display in messages.
2023-03-27 12:39:11 +01:00
LCN.cpp
LCN bugfix
2023-02-12 20:38:03 +01:00
LCN.h
update copyright notes
2022-01-07 02:28:35 +01:00
LICENSE
Create LICENSE
2020-06-12 22:51:42 -06:00
LiquidCrystal_I2C.cpp
Update LiquidCrystal_I2C.cpp
2023-02-22 21:06:39 +00:00
LiquidCrystal_I2C.h
Update LCD driver to make it more reliable
2023-02-21 11:00:27 +00:00
MotorDriver.cpp
AVR: Pin specific timer register seting for speed and mode when inrush throttling and for DC PWM
2023-08-02 01:05:31 +02:00
MotorDriver.h
Rename track mode OFF to NONE
2023-08-02 10:00:43 +02:00
MotorDrivers.h
Pin handling supports pins up to 254
2023-05-21 11:54:46 +02:00
myAutomation.example.h
Update myAutomation.example.h
2023-03-18 18:53:48 +00:00
myEX-Turntable.example.h
Add myEX-Turntable.example.h
2022-08-14 07:11:38 +10:00
myHal.cpp_example.txt
sample file corrections
2023-08-30 23:26:20 +02:00
myHal.cpp.txt
Add FLAGS device for EX-RAIL state communications. Improve VPIN display in messages.
2023-03-27 12:39:11 +01:00
objdump.bat
smaller random
2022-06-18 13:58:46 +01:00
objdump.sh
fix objdump.sh
2020-09-26 22:28:29 +02:00
Outputs.cpp
update copyright notes
2022-01-07 02:28:35 +01:00
Outputs.h
update copyright notes
2022-01-07 02:28:35 +01:00
platformio.ini
ESP32 mDNS registration for throttle autodiscovery
2023-06-23 18:08:05 +08:00
README.md
Update README.md
2024-02-16 18:02:40 +10:00
release_notes.md
Update release_notes.md
2022-10-28 10:52:12 -04:00
RingStream.cpp
Ensure correct functions are called for strcpy_P, strncmp_P, strlen_P etc. on non-AVR targets..
2023-01-23 22:28:43 +00:00
RingStream.h
HIGHMEM + WITHROTTLE
2022-12-16 13:14:48 +00:00
Sensors.cpp
update copyright notes
2022-01-07 02:28:35 +01:00
Sensors.h
update copyright notes
2022-01-07 02:28:35 +01:00
SerialManager.cpp
Add serial output for sabertooth controller
2023-05-01 20:18:32 +02:00
SerialManager.h
Command Distributor
2022-06-10 12:22:28 +01:00
SSD1306Ascii.cpp
Update SSD1306Ascii.cpp
2023-02-25 11:42:43 +00:00
SSD1306Ascii.h
Support for multiple displays
2023-02-16 16:41:13 +00:00
StringBuffer.cpp
Command Distributor
2022-06-10 12:22:28 +01:00
StringBuffer.h
HIGHMEM + WITHROTTLE
2022-12-16 13:14:48 +00:00
StringFormatter.cpp
format option to write microseconds
2023-06-21 10:43:41 +02:00
StringFormatter.h
Rename LCDDisplay class to Display; renameEXRAIL LCD2 macro to SCREEN
2023-02-11 23:37:09 +00:00
TrackManager.cpp
Bugfix: ESP32 30ms off time
2023-08-25 19:07:57 +02:00
TrackManager.h
change from trackMode[t] to track[t]->{get,set}Mode
2023-07-17 02:26:29 +02:00
Turnouts.cpp
Refactor usage of delay() into an Helper IO class that schedules pin bouncing back
2023-11-09 21:16:17 -05:00
Turnouts.h
Add support for HBRIDGE Turnouts, allowing control of Kato turnouts that require reverse of polarity and short power application, easily configurable through 2-pin controlled Motor H-Bridge.
2023-11-06 21:54:25 -05:00
version.h
EX-IO fixes in version
2024-01-21 07:13:53 +10:00
WifiESP32.cpp
copyright, version and compile warnings fix
2023-07-08 08:58:00 +02:00
WifiESP32.h
copyright, version and compile warnings fix
2023-07-08 08:58:00 +02:00
WifiInboundHandler.cpp
HIGHMEM + WITHROTTLE
2022-12-16 13:14:48 +00:00
WifiInboundHandler.h
HIGHMEM + WITHROTTLE
2022-12-16 13:14:48 +00:00
WifiInterface.cpp
Add AT check delay for longer init delays in ESP32 versions
2023-11-06 21:39:29 -05:00
WifiInterface.h
copyright, version and compile warnings fix
2023-07-08 08:58:00 +02:00
WiThrottle.cpp
char * / flashstring conflict
2023-05-25 14:02:28 +02:00
WiThrottle.h
HIGHMEM + WITHROTTLE
2022-12-16 13:14:48 +00:00
