Prepping for version 4.1
SERVO_SIGNAL definition in EXRAIL
SERVO_SIGNAL(vpin, redpos, amberpos, greenpos)
use RED/AMBER/GREEN as for led signals.
* SIGNALH, ATGTE, ATLT
UNTESTED
* Automatic ALIAS(name)
and _ in keywords
* EXRAIL FORGET current loco
* EXRAIL </KILL ALL>
* EXRAIL VIRTUAL_TURNOUT
* Cleanup version.h
* Update version.h (#223)
Rewrite & Updated the 4.0.0 Section
* </KILL ALL> fix
* Incoming LCN turnout throw.
* KILLALL macro
and DIAGNOSTIC messages when KILL command used.
* EXRAIL PARSE
* Rebuild throttle info getters
UNTESTED... create different methods to obtain throttle info without being withrottle specific.
Also implements turnout description of "*" as hidden.
* J command parsing
JA JR JT commands parsed
EXRAIL sets hidden turnout state
HIDDEN description macro
Turnouts hidden flag bit
UNO seems OK, MEGA UNTESTED
* Assist notes draft & syntax tweaks
* Throttle notes
* uno memory saver
* JA JR and <t cab>
* Subtle corrections
* Update version.h
* I2C code corrections
Corrections to I2C code:
1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact.
2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest().
* RAG Ifs and cmds
* IF block perf/memory
* Allow negative route ids.
* correct GREEN keyword
* Update version.h
* myFilter auto detect
* Update version.h
* fix weak ref to myFilter
* ACK defaults now 50-2000-20000
* Update version.h
* Improved SIGNALs startup and diagnostics
* Update IO_PCA9685.cpp
* Allow turnout id 0
* Position servo pin used as GPIO
* NoPowerOff LEDS
* CALLBACK parameter optional for Write
* WRITE CV ON PROG <W CV VALUE>
Callback parameters are now optional on PROG
* Updated CV read command <R cv>
Equivalent to <V cv 0> uses the verify callback.
Co-authored-by: Asbelos <asbelos@btinternet.com>
Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com>
Co-authored-by: Neil McKechnie <neilmck999@gmail.com>
Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
Alias for existing <D SERVO ...> command added as <D ANOUT ...> (since not all analogue outputs are servos). Also, <D ANIN vpin> added to display the value of an analogue input pin.
The range of accessory decoder addresses for the <a> command is 0-511 in line with the DCC packet contents. The turnout command previously rejected address 0; this has been changed to the same range of addresses can be used by both commands, i.e. address 0-511 and subaddress 0-3. The linear address mapping remains so that linear address 1 is addr/subaddr 1/0; i.e. the first decoder address is not accessible by linear address.
<a addr subaddr 1> command puts a D=1 into the DCC packet for a DCC Accessory Decoder. This was previously though to correspond to a 'throw' request and a D=0 to a 'close' request. RCN-213 standard identifies that D=1 is 'close' and D=0 is 'throw', so this change allows CS to be configured to invert the states to conform to the RCN-213 definition.
commit b34205b142
Merge: 87032482829716
Author: Neil McKechnie <75813993+Neil-McK@users.noreply.github.com>
Date: Mon Aug 23 10:05:54 2021 +0100
Merge branch 'EX-RAIL' into ackRetry
commit 8703248c49
Author: Ash-4 <81280775+Ash-4@users.noreply.github.com>
Date: Sun Aug 22 16:47:38 2021 -0500
ACK RETRY max 255 with fallback to 3 if greater
And includes LCD lines for power and ACK diags.
commit f5d4522ed7
Author: Ash-4 <81280775+Ash-4@users.noreply.github.com>
Date: Sun Aug 22 16:40:13 2021 -0500
ACK RETRY updated datatypes
commit 1dbf236697
Author: Ash-4 <81280775+Ash-4@users.noreply.github.com>
Date: Sun Aug 22 16:35:14 2021 -0500
ACK RETRY updated datatypes
commit d93584e9a4
Author: Ash-4 <81280775+Ash-4@users.noreply.github.com>
Date: Sun Aug 22 13:16:24 2021 -0500
ACK RETRY updated default is 2 retries.
commit f58ebac670
Author: Ash-4 <81280775+Ash-4@users.noreply.github.com>
Date: Sat Aug 21 16:43:21 2021 -0500
ACK RETRY is 3 or less (default is 1)
commit 08350b215a
Author: Ash-4 <81280775+Ash-4@users.noreply.github.com>
Date: Sat Aug 21 11:55:17 2021 -0500
ACK RETRY
LCD display update.
lcd(0, F("RETRY %d %d %d %d"), ackManagerCv, ackManagerRetry, ackRetry, ackRetrySum);
commit 11cd216017
Author: Ash-4 <81280775+Ash-4@users.noreply.github.com>
Date: Sat Aug 21 00:54:28 2021 -0500
ACK RETRY
ACK retry code added to ackManagerSetup and callback.
The default is <D ACK RETRY 1>. For ACK tuning, set retry to zero.
Retry count is captured on the LCD display, and lines in the serial monitor.
commit b67027a1ed
Author: Ash-4 <81280775+Ash-4@users.noreply.github.com>
Date: Sat Aug 21 00:33:01 2021 -0500
ACK RETRY variables added
commit 34d2ab3543
Author: Ash-4 <81280775+Ash-4@users.noreply.github.com>
Date: Sat Aug 21 00:23:34 2021 -0500
Update DCCEXParser.cpp
LCD lines added to display power commands and ACK settings, when updated.
Also new command <D ACK RETRY 1>.
commit 8ca4011cb0
Author: Ash-4 <81280775+Ash-4@users.noreply.github.com>
Date: Fri Aug 20 23:58:13 2021 -0500
Update CommandStation-EX.ino
Update LCD row number for Ready and Free RAM.
commit 6571138389
Author: Harald Barth <haba@kth.se>
Date: Sun Aug 1 22:08:34 2021 +0200
optimize command parser for size
commit c4f659243e
Author: Harald Barth <haba@kth.se>
Date: Sun Aug 1 15:07:06 2021 +0200
optimize for loops for size (and speed)
commit 55b7091d5a
Author: Harald Barth <haba@kth.se>
Date: Sun Aug 1 12:45:29 2021 +0200
take less progmem for messages
commit 6d7c1925b0
Author: Harald Barth <haba@kth.se>
Date: Sun Aug 1 11:56:12 2021 +0200
only pragma -O3 critical functions
Ensure that the <H> message is sent on the serial USB (to JMRI) whenever the turnout is closed or thrown, even if the request didn't originate on the serial USB.
Turnout class split into a base class for common code and specific subclasses for Servo, DCC, VPIN and LCN turnouts.
Interface further narrowed to reduce direct access to member variables.
Turnout creation command handling has been moved into the DCCEXParser class.
Turnout function and parameter names changed to make the Throw and Close functionality explicit.
Turnout commands <T id C> (close) and <T id T> (throw) added.
* Add <D SERVO vpin position> command
Allow a PWM servo to be driven to any arbitrary position.
* Enhancements for HAL drivers
Add state change notification for external GPIO module drivers;
Allow drivers to be installed statically by declaration (as an alternative to the 'create' call).
* Create IO_HCSR04.h
HAL driver for HC-SR04 ultrasonic distance sensor (sonar).
* Enable servo commands in NO-HAL mode, but return error.
Avoid compile errors in RMFT.cpp when compiled with basic HAL by including the Turnout::createServo function as a stub that returns NULL.
* Update IO_HCSR04.h
Minor changes
* Change <D SERVO>
Give the <D SERVO> command an optional parameter of the profile. For example, <D SERVO 100 200 3> will slowly move the servo on pin 100 to PWM position corresponding to 200. If omitted, the servo will move immediately (no animation).
* IODevice (HAL) changes
1) Put new devices on the end of the chain instead of the beginning. This will give better performance for devices created first (ArduinoPins and extender GPIO devices, typically).
2) Remove unused functions.
* Update IO_HCSR04.h
Allow thresholds for ON and OFF to be separately configured at creation.
* Update IODevice.cpp
Fix compile error on IO_NO_HAL minimal HAL version.
* Update IO_PCA9685.cpp
Remove unnecessary duplicated call to min() function.
Split update from read value;
Inhibit interrupts when reading (normally done from loop code);
Don't inhibit interrupts when updating (normally done from interupt code);
Make freeMemory() local and ask for inline code generation.
